Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

Problem station wmr100

Discussion specific to Oregon Scientific weather stations
giulio3x
Posts: 3
Joined: Sun Jun 29, 2014 1:29 pm
Weather Station: os wmr100
Operating System: windows 7 64 bit
Location: italia

Problem station wmr100

Postby giulio3x » Sun Jun 29, 2014 1:39 pm

Good morning, i write from Italy.
I have the problem with station wmr100.
After the installation of cumulus settings do not appear on the VP selection USB section, how can I do?
thank you

User avatar
steve
Cumulus Author
Posts: 26619
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Problem station wmr100

Postby steve » Sun Jun 29, 2014 1:47 pm

Please see the help - the 'VP Type' only applies to Davis stations. WMR100 stations are all USB, so you don't need tell Cumulus to use USB, there is no alternative.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development since I have retired from my day job

giulio3x
Posts: 3
Joined: Sun Jun 29, 2014 1:29 pm
Weather Station: os wmr100
Operating System: windows 7 64 bit
Location: italia

Re: Problem station wmr100

Postby giulio3x » Sun Jun 29, 2014 2:08 pm

I understand, the fact remains that by connecting the station to the pc (windows 7 64bit), cumulus remains with all the values ​​to 0

User avatar
steve
Cumulus Author
Posts: 26619
Joined: Mon Jun 02, 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Problem station wmr100

Postby steve » Sun Jun 29, 2014 2:24 pm

Please turn on the debug log and wait for a few minutes. Then zip up the diags folder and the debug.log file, and attach them to a reply.
Steve
-----
Hosting available for Cumulus web sites. See http://sandaysoft.com/forum/viewtopic.php?f=2&t=11876

Please read the posts in the Announcements section about the current status of Cumulus development since I have retired from my day job

giulio3x
Posts: 3
Joined: Sun Jun 29, 2014 1:29 pm
Weather Station: os wmr100
Operating System: windows 7 64 bit
Location: italia

Re: Problem station wmr100

Postby giulio3x » Mon Jun 30, 2014 9:02 am

after many attempts I managed to get it to communicate with the PC and I can see all the data in real time on the PC, I have a problem, but unfortunately the original wind and temperature sensors have failed and I had to take a second anemometer and a thermo-hygrometer that I placed on ch.2, unfortunately if the anemometer works and I see the data, the hygrometer as soon as I connect the station to the PC stops receiving the signal, and I always value 0 of 0 outside temperature and the humidity, I do not know what to do

attention:
I found the problem, when I connect via usb weather station, receiving the external sensor decreases and so I have to bring the external probe, thanks a greeting


Return to “Oregon Scientific”

Who is online

Users browsing this forum: No registered users and 4 guests