Page 1 of 1

Bad data from faulty WMR 88A

Posted: Thu 01 Jun 2017 10:35 pm
by Spudler
I recently had to change my station to a WMR 200A but before that my WMR 88A started going bonkers and recorded a high temp of 107 when it was 60 outside and recorded some humidity readings of 10% when it was raining etc.
So I have some bad data recorded and not only that it is recorded in my all time records sections.
how do I go about modifying this info so at least my records will be correct?
I don't think we ever get 107 for a high nor 10% humidity as a low so those will never be overwritten naturally.
I have tried reading the info I have on how to replace bad data but am either not reading correct info or
just am not comprehending it .

Re: Bad data from faulty WMR 88A

Posted: Fri 02 Jun 2017 7:04 am
by water01
Cumulus 1 use the built in editors. Cumulus MX edit files manually. Look in the Wiki here http://wiki.sandaysoft.com/a/FAQ#How_do ... records.3F

Re: Bad data from faulty WMR 88A

Posted: Tue 06 Jun 2017 1:46 am
by Spudler
Thanks I am using Cumulus 1.9.4
I am not sure what Cumulus MX actually is is it similar to Cumulus 1.9.4 as far as the display and uploading to say twitter, Weather Underground, PWS etc.
I love the cumulus ability to view live display on computer and upload my data to the above mentioned web sites.