Page 1 of 1

Cumulus squared

Posted: Sat 18 Feb 2012 4:18 am
by gwheelo
Is there a way to run two instances of Cumulus in order to access two separate Oregon consoles - for instance a 928/968 and a 100/200.

My purpose is to have the standard 928/968 sensors on one instance and the solar sensor on the 100/200. It sounds crazy, I know. Why not just have it all with a 200. I wish to maintain the 0 - 359 degrees wind bearing available from the 928/968 because of the historical local windrose but I would like to add the UV info from the 100/200. Perhaps there is an alternate answer - I am open to suggestions.

George Wheelock

Re: Cumulus squared

Posted: Sat 18 Feb 2012 5:15 am
by beteljuice
Don't they transmit on the same frequency George ?

Re: Cumulus squared

Posted: Sat 18 Feb 2012 11:23 am
by steve
You can run two separate installations of Cumulus, one for your 928 and one for your 200, they won't interfere (from the Cumulus point of view).

Re: Cumulus squared

Posted: Sat 18 Feb 2012 1:09 pm
by gwheelo
Don't they transmit on the same frequency George ?
I don't know - anybody........?

GW

Re: Cumulus squared

Posted: Sat 18 Feb 2012 2:59 pm
by beteljuice
Have you tried running them together ?

Re: Cumulus squared

Posted: Sun 19 Feb 2012 4:48 am
by gwheelo
Have you tried running them together ?
Unable to run them both together as I only have a 968 - unable to purchase a 100/200 until I am certain they will co-habit in peace.

Perhaps someone has an idea for an inexpensive console and UV sensor compatible with Cumulus - or any other ideas.

El Cheapo https://cumulus.hosiene.co.uk/posting.php ... f=5&t=7077# https://cumulus.hosiene.co.uk/posting.php ... f=5&t=7077#