Please read the posts in the Announcements section about the current status of Cumulus development now that I have retired

Please read this post before posting

Latest Cumulus release v1.9.4 (build 1099) - Nov 28 2014
Latest Cumulus MX release - v3.0.0 build 3043 Jan 20 2017. See this post for download

VP 2 and New to Cumulus/use w/USB Data Logger?

Discussion specific to Davis weather stations
Posts: 1
Joined: Wed Oct 25, 2017 7:54 pm
Weather Station: Vantage Pro/Vantage Pro 2
Operating System: Windows 7 64 Pro/Windows 10 64 P

VP 2 and New to Cumulus/use w/USB Data Logger?

Postby sreilly24590 » Wed Oct 25, 2017 8:18 pm

First let me say that this is my first experience with this software and I'm working on a remote observatory setup hundreds of miles away. That computer is running Windows 10 64 bit. I'm in Virginia and the telescope observatory is at Notre Dame University. The VP2 is installed and uses the USB Data Logger interface. As I read it Cumulus will not interact directly with this data logger and there is a Davis software solution. This is where I get confused. Weatherlink 6.0.3 is installed and I'm needing a bit more explanation of what the proper procedure is to get this unit to communicate with CU. As I understand it CU can use either an IP address or a COM port (serial). I understand that USB is serial but trying all available COM port numbers listed in Device Manager just hangs the program for a short period while it tries to connect and fails each time. Any assistance would be great. I have read through this page and am unclear where I need to start and whether I can actually do this remotely. Sorry if it seems I'm a bit thick headed.


Posts: 4
Joined: Sat Aug 02, 2014 11:58 am
Weather Station: Davis
Operating System: Win7
Location: New Jersey

Re: VP 2 and New to Cumulus/use w/USB Data Logger?

Postby Belmardays » Mon Oct 30, 2017 1:24 am

yes you can, I did it tonight and im not the smarttest guy, update the silcon app, then update the drive from the mycomputer usb in device manger

Return to “Davis VP/VP2/Vue”

Who is online

Users browsing this forum: No registered users and 5 guests