Hi,
I am an absolute beginner so apologies for a very basic question.
I would like to use Steel Gauges along with Weather Display. Do I have to have Cumulus installed for Steel Gauges to work? I have read the Wiki but I am finding it difficult to follow and many links referred to in previous forum questions no longer work. I have looked for a forum on Steel Gauges but all links bring me back to Cumulus.
Any help would be appreciated.
Thanks
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Basic advice
Moderator: mcrossley
- mcrossley
- Posts: 12756
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Basic advice
No you do not need Cumulus, the gauges work with WeatherDisplay too. If you have any questions, ask on the WD forum, there are lots of users over there experienced in setting them up with WD - it is a bit different from Cumulus.
-
- Posts: 2
- Joined: Wed 11 Feb 2015 7:10 pm
- Weather Station: vantage vue
- Operating System: win 7
- Location: stockport
Re: Basic advice
Many thanks for that. Looking forward to using your great presentation.