WeatherDuino Pro2 - Build yourself a full Weather Station

[laulau]

Hi,
I've connected WeatherDuino Pro2 PLUS to a Raspberry Pi2 with CMX V3 b3043 running .
I noticed i've very often this message in MXdiag file : !!! loop data not received, bytes received = 95
What does it mean ?

[Werk_AG]

Hi Laurent,

This means that by sure you have done significant changes on the WeatherDuino Pro2 PLUS code, which makes that it is busy doing something else, instead of being ready to answer to loop commands.

A possible cause could be a change in the WU upload routines to try to upload data more frequently than allowed. But there are many other possibilities. Execution time of each routine is critical. If you want to change the code you should be very careful about the execution time of each routine.

By the amount of times you are getting the message "loop data not received" I could bet that the changes are somehow related with the use of the WiFi

[laulau]

Hi Laurent,

This means that by sure you have done significant changes on the WeatherDuino Pro2 PLUS code, which makes that it is busy doing something else, instead of being ready to answer to loop commands.

A possible cause could be a change in the WU upload routines to try to upload data more frequently than allowed. But there are many other possibilities. Execution time of each routine is critical. If you want to change the code you should be very careful about the execution time of each routine.

By the amount of times you are getting the message "loop data not received" I could bet that the changes are somehow related with the use of the WiFi

You're right, i'm using WIFI to get data (domotique) from my server to display them in a specific screen.
I'll have a go with this 'domodata' disabled to see what happens .
Thanks

[laulau]

It' working fine with my code modifications disabled. I was doing a request (through WIFI) every minute !
Will do that every 10 minutes and see how it works.
Thanks again Werk_AG

[Werk_AG]

All users of the WeatherDuino Pro2 PLUS can now add Air Quality data to their Weather Station.



The WeatherDuino Air Quality Monitor, is a device which can be used as stand alone unit, but also have the capability to send data to a WeatherDuino Pro2 PLUS receiver, which by turn can send this data to a ThingSpeak channel, or directly to your Wunderground webpage, using the WiFi capabilities of the WeatherDuino Pro2 PLUS receiver.

Here is a link to my ThingSpeek public channel, where you can see live data from Meteocercal Weather Station: https://thingspeak.com/channels/317451
Here is Air Quality live data directly on MeteoCercal website: http://www.meteocercal.info/wx_AirQualityIndex.php




Example of PM2.5 and PM10 graph at Wunderground:



The sensor used to measure PM2.5 and PM10 particles is the PMS7003.



For more info about the WeatherDuino Air Quality Monitor, please visit the WeatherDuino support forum

[Werk_AG]

The WeatherDuino WiKi is already available.
Still is a work in progress, but already contains a lot of useful info, specially for those who are looking for quick information about the WeatherDuino system.
Everyday more info is being added.

For visiting it, please click in the link below

WeatherDuino WiKi