Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
New Steelseries Gauges and Cumulus 1
Moderator: mcrossley
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
New Steelseries Gauges and Cumulus 1
Hi, steelseries and cumulus users
I have a small question. I have a website http://www.wiatrkadyny.pl which works on minipc (windows 10), Cumulus 1, and steelseries gauges scriptVer: '2.4.4 - 2013-08-25',
The above version works smoothly, but when I wanted to upgrade steeseries gauges, unfortunately the pointers no longer work at all. Is it related to realtime.txt file ?? My file generates decimals with a comma (,) and CumlusMX (which I cannot install on windows10) decimal parts are generated with a dot (.).
Is there any simple solution to running the latest steeseries gauges on Cumulus 1?
I have a small question. I have a website http://www.wiatrkadyny.pl which works on minipc (windows 10), Cumulus 1, and steelseries gauges scriptVer: '2.4.4 - 2013-08-25',
The above version works smoothly, but when I wanted to upgrade steeseries gauges, unfortunately the pointers no longer work at all. Is it related to realtime.txt file ?? My file generates decimals with a comma (,) and CumlusMX (which I cannot install on windows10) decimal parts are generated with a dot (.).
Is there any simple solution to running the latest steeseries gauges on Cumulus 1?
- mcrossley
- Posts: 12885
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Steelseries Gauges and Cumulus 1
The gauges use the file realtimeGaugesT.txt.
If you could put up a temporary page with the new scripts I can take a look at what is going wrong.
If you could put up a temporary page with the new scripts I can take a look at what is going wrong.
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
Re: New Steelseries Gauges and Cumulus 1
Hi, thank you for such a quick response.
I did 2 sample sites.
http://www.wiatrkadyny.pl/minipc - is a page with current gauges and a realtimegauges.txt file copied from the home page (http://www.wiatrkadyny.pl).
http://www.wiatrkadyny.pl/gauges is the same site, with copied the same file realtimegauges.txt and replaced it with a newer version of the steelseries file.
As you see in the version 1, gauges work just fine, while in the second one gauges do not read anything.
I did 2 sample sites.
http://www.wiatrkadyny.pl/minipc - is a page with current gauges and a realtimegauges.txt file copied from the home page (http://www.wiatrkadyny.pl).
http://www.wiatrkadyny.pl/gauges is the same site, with copied the same file realtimegauges.txt and replaced it with a newer version of the steelseries file.
As you see in the version 1, gauges work just fine, while in the second one gauges do not read anything.
- mcrossley
- Posts: 12885
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Steelseries Gauges and Cumulus 1
The first problem I see is that you have edited "dashboard.js" and line 396 you have unquoted text...
That file isn't part of the gauges package anyway
There is the same error on line 410...
ddata = new Array(humos,humis,humex1,humex2)
And you have uninitialised variables: "ExtraSensor1Name" and "ExtraSensor2Name"
Code: Select all
ddata = new Array(tempos,tempis,tempex1,tempex2,tempdp,temphi,tempwc)
*should be*
ddata = new Array("tempos","tempis","tempex1","tempex2","tempdp","temphi","tempwc");
There is the same error on line 410...
ddata = new Array(humos,humis,humex1,humex2)
And you have uninitialised variables: "ExtraSensor1Name" and "ExtraSensor2Name"
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
Re: New Steelseries Gauges and Cumulus 1
Hi! I've seen earlier this bug. To be honest i didn't know what does this script, so i removed it from site. Bug seems to be gone, i cannot see any impact, but still there is issue with indicators.
On www.wiatrkadyny.pl/minipc works fine, on www.wiatrkadyny.pl/gauges indicators are not working correctly.
On www.wiatrkadyny.pl/minipc works fine, on www.wiatrkadyny.pl/gauges indicators are not working correctly.
- mcrossley
- Posts: 12885
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Steelseries Gauges and Cumulus 1
You have removed the "Status scroller", the error message would have appeared there.
Your realtimeGaugesT.txt file is out of date (version 11 - the script is expecting version 12 or later).
Your realtimeGaugesT.txt file is out of date (version 11 - the script is expecting version 12 or later).
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
Re: New Steelseries Gauges and Cumulus 1
Hi Mark
as i wrote before issue was caused by realtimegauges.txt, my old file had digits with coma and new has dot. I've updated Cumulus 1 and new verion of indicators is working. Thanks for your help! Unfortunatley i'm convinced it won't be my only issue.
one more thing.
can you advise me how to set default parameter for claudbase to meters
Cheers!
as i wrote before issue was caused by realtimegauges.txt, my old file had digits with coma and new has dot. I've updated Cumulus 1 and new verion of indicators is working. Thanks for your help! Unfortunatley i'm convinced it won't be my only issue.
one more thing.
can you advise me how to set default parameter for claudbase to meters
Cheers!
-
- Posts: 3292
- Joined: Sat 13 Aug 2011 9:33 am
- Weather Station: Ecowitt HP2551
- Operating System: Windows 10 64bit
- Location: Burnham-on-Sea
- Contact:
Re: New Steelseries Gauges and Cumulus 1
It is set in the cookie box below the gauges.
The units actually displayed will be read from the realtime.txt file, or from the users last visit cookie
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
Re: New Steelseries Gauges and Cumulus 1
Hi, as i mentioned before, i have more questions.
Unfortunately, default value for cloud base are feets, and when it is changed for meters next to indicator it is only temporary, after refresh it is changed again to feets. How can i change default value permanently?
Additionally something has changed in pressure indicator. It is whole red , i would like to disable this. Where can i do that in gauges.js file?
You can chec on http://www.wiatrkadyny.pl/new
Best Regards.
Unfortunately, default value for cloud base are feets, and when it is changed for meters next to indicator it is only temporary, after refresh it is changed again to feets. How can i change default value permanently?
Additionally something has changed in pressure indicator. It is whole red , i would like to disable this. Where can i do that in gauges.js file?
You can chec on http://www.wiatrkadyny.pl/new
Best Regards.
- mcrossley
- Posts: 12885
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Steelseries Gauges and Cumulus 1
As was explained above. The default value displayed is the unit you use for your raw data. You can select the alternate unit on the page and this option is stored in a browser cookie. When you reopen the page it will remember your choice - *if* you have cookies enabled. It works for me on your page.Mincek wrote:Hi, as i mentioned before, i have more questions.
Unfortunately, default value for cloud base are feets, and when it is changed for meters next to indicator it is only temporary, after refresh it is changed again to feets. How can i change default value permanently?
To make it default to the alternate unit is something you would have to figure out for yourself, it would require some coding and I don;t have time for that right now.
You have changed the default minimum pressure for the gauge from 990 to 960 in the script.Mincek wrote: Additionally something has changed in pressure indicator. It is whole red , i would like to disable this. Where can i do that in gauges.js file?
You can chec on http://www.wiatrkadyny.pl/new
Best Regards.
Code: Select all
baroScaleDefMinhPa : 990,
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
Re: New Steelseries Gauges and Cumulus 1
I noticed that issue with default value appears only on FF browser, so we can skip it. In gauges.js baroScaleDefMinhPa is set to 960 and it always has been like that. That is why this change suprises me. Is there any other place where it can be changed? Or does this change needs time to update?
- mcrossley
- Posts: 12885
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Steelseries Gauges and Cumulus 1
Odd, I'll take a look... Works for me in FF too?Mincek wrote:I noticed that issue with default value appears only on FF browser, so we can skip it.
In the distributed file it is set to 990, line 117 - https://github.com/mcrossley/SteelSerie ... /gauges.jsMincek wrote:In gauges.js baroScaleDefMinhPa is set to 960 and it always has been like that. That is why this change suprises me. Is there any other place where it can be changed? Or does this change needs time to update?
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
Re: New Steelseries Gauges and Cumulus 1
maybe only on my computer ?? like I said, skip it.
ofcourse, line 117.
link to my script is:
http://www.wiatrkadyny.pl/new/scripts/gauges.js
This is screenshot from my gauges.js
ofcourse, line 117.
link to my script is:
http://www.wiatrkadyny.pl/new/scripts/gauges.js
This is screenshot from my gauges.js
-
- Posts: 14
- Joined: Mon 25 Sep 2017 7:51 am
- Weather Station: wh1080
- Operating System: win10/rapsberry pi 2
Re: New Steelseries Gauges and Cumulus 1
as You can see today the red area is from 960 to 1005 hp, yesterday morning was from 960 to 1040 hpa
- mcrossley
- Posts: 12885
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Steelseries Gauges and Cumulus 1
I see 960 to 1050 which is what you have configured in your script.