Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
AirLink Reboot
-
- Posts: 1826
- Joined: Sat 17 Dec 2011 11:55 am
- Weather Station: Davis Vantage Pro2
- Operating System: Windows 11 x64
- Location: Dorset - UK
- Contact:
AirLink Reboot
Due to the placement of my AirLink, there are times when I have to unplug it for short interval. When it comes back online, Cumulus records zero for all values, including the AQI, then it spikes the values, before going back to normal.
- mcrossley
- Posts: 12788
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: AirLink Reboot
All I can suggest is you disable the AirLink in the CMX config before the reboot then enable it again say a hour afterwards and it's readings have stabilised. When it starts up it has to restart calculating it's averages.
- mcrossley
- Posts: 12788
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: AirLink Reboot
I have added a ToDo item to ignore zero PM readings if the confidence values are zero - that should suppress these zero values on reboot being logged.