I've been using IPTL since the end of May. I have it setup to get my weather info from WD. But I don't like how it shows wind with decimal places. And pressure shows only with 1 decimal place.
I had an HTX file from a long time ago that I tried switching to yesterday. But the issue is the text spacing changes. So as wind goes from N, NNW, or speed goes from 9 to 15, it adds more characters per a line.
The issue comes along when my nightly video is made. It makes the text jump all over. Kind of a twitchy view of the video.
My current HTX file just has this:
Temp: <#temp><#tempunitnodeg> Wind: <#currentwdir> at <#wlatest> <#windunit> Gust: <#wgust> <#windunit> Pressure: <#press> <#pressunit> Rain: <#rfall> <#rainunit>
But I need to figure out how to change that so all the text stays in the same spacing.
If you look at the beginning of the video, it was WD. At about 1:00 pm, it switches to the Cumulus file I had. So you can see the text twitching. I'm guessing I need to figure out how to hard code each value to the number of characters I want. Appreciate the help.
https://www.youtube.com/watch?v=UoZstJf7jMg
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
IPTimelapse Template file
Moderator: mcrossley