My Tempest weather station arrives today (to add to my Davis Vantage and Ecowitt Wittboy)
Can I just copy the data and Cumulus.ini across from the Davis Station to a new install then change the settings to read the data from the Tempest or could that cause problems.
Would it be best to start afresh??
Welcome to the Cumulus Support forum.
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Cumulus MX V4 beta test release 4.0.0 (build 4019) - 03 April 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
New Station - Old Data
Moderator: mcrossley
- The Dalek Hunter
- Posts: 256
- Joined: Wed 05 Aug 2020 11:51 am
- Weather Station: Ecowitt GW1000B, Ecowitt GW2000
- Operating System: macOS Sonoma on a Mac Mini M2
- Contact:
-
- Posts: 2483
- Joined: Wed 08 Jun 2011 11:19 am
- Weather Station: Davis Vantage Pro 2 + Ecowitt
- Operating System: GNU/Linux Ubuntu 22.04 LXC
- Location: Alcaston, Shropshire, UK
- Contact:
Re: New Station - Old Data
The data is pretty much station-agnostic - apart from some stations having sensors such as solar - so should be transferrable. I would start with a fresh install, and then copy your old data in - not forgetting to change the "date records began" setting.
- mcrossley
- Posts: 12778
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: New Station - Old Data
Either way you are possibly going to have a issue with the rainfall on the day you switch over. If you do, use the rainfall editor to correct it, then leave it until the following day.
Personally, I would just make a backup copy of the current installation, then change the station type and restart.
Personally, I would just make a backup copy of the current installation, then change the station type and restart.