Cumulus Realtime Gadget

dane · **Posted:** Fri Jan 15, 2010 12:52 am

Version 1.8IH uploaded to first post in this thread.
Change: handling of communication errors improved - maybe even fixed :!:

thanks to Beteljuice

beteljuice · **Posted:** Fri Jan 15, 2010 1:11 am

.... and before the glamour wears off, you are respectfully reminded that the weather graphics are FORECAST conditions, not current weather

Super-T · **Posted:** Fri Jan 15, 2010 2:01 am

3 gadget running....normally 20% opacity.
These sites are within about 5 km but lots of difference in the forecast.
Needs a Label to to differentiate the sites.

beteljuice · **Posted:** Fri Jan 15, 2010 2:18 am

Quote:

Needs a Label to to differentiate the sites

But Terry, you're only supposed to be stealing your own data !

Besides, where would "JANTER Electronics Ltd, Weather" fit :roll:

Super-T · **Posted:** Fri Jan 15, 2010 9:35 am

I'll have to make a shortcut and park it over the gadget :-)

dane · **Posted:** Fri Jan 15, 2010 10:44 pm

Version 1.9IH available for download from first post of this thread.

Note: version 1.9 is named cumulus19, so you can install it without losing your version 1.8 which is called cumulusih.
(Both versions are available for download. Make sure you select the one you want.)

Changes in Version 1.9IH:
- 'Last updated' text string above time stamp at the bottom
- temperature and pressure trend arrows preceding numbers
- 2nd temperature field: may be set to any of realtime.txt's fields - or left out
(default: field 24: wind chill)
This variable is NOT on the settings screen, only in settings.ini
- settings.ini: js language: variable names/values, comments
Make yourself familiar with the contents and format of the new settings.ini!

If you don't like wind chill as the 2nd temperature field after the slash, you may choose dew point, heat index, tendency, or any field from the realtime.txt (even Cumulus version...) - or leave it out altogether. That's what the new settings.ini parameter is for.

Super-T · **Posted:** Sat Jan 16, 2010 12:30 am

All working OK Dane.
Perhaps the "Last Updated" could have become the realtime ID? ..... i.e. "JANTER" Just a thought.

I hadn't thought that the use of the realtime.txt from somebody else's site would be theft? Ah well...too bad :-)

sjukmidlands · **Posted:** Sat Jan 16, 2010 12:50 am

Diolch! (Thank you in Welsh)

The work you are putting into this gadget is much appreciated! It is developing very very nicely.

Steve

claydon_dan · **Posted:** Sat Jan 16, 2010 10:27 pm

Hi,

Just been reading through, and I must say it is great to see how the gadget has developed since my early releases.

If it hasn't already been figured out, what is shown below that looks like 3 attempts is actually just the XML reader going through its various states.

1 - LOADING:The load is in progress. Reading persisted properties, but not yet parsing data.
2 - LOADED: Reading of the persisted properties completed. Reading and parsing data, but the object model is not yet available.
3 - INTERACTIVE: Some data has been read and parsed, and the object model is now available on the partially retrieved data set. Although the object model is available during this state, it is read-only.
4 - COMPLETED: The document has been completely loaded, successfully or unsuccessfully.
(http://msdn.microsoft.com/en-us/library/ms753702(VS.85).aspx)

TNETWeather wrote:

Looks like it is making multiple attempts (very fast ones which might be the problem)

Code:

January 2010 17:41:24: Enter readyStateHandler
January 2010 17:41:24: xmlHttpObj.readyState = 2
January 2010 17:41:24: xmlHttpObj.status = 404

January 2010 17:41:24: Enter readyStateHandler
January 2010 17:41:24: xmlHttpObj.readyState = 3
January 2010 17:41:24: xmlHttpObj.status = 404

January 2010 17:41:24: Enter readyStateHandler
January 2010 17:41:24: xmlHttpObj.readyState = 4
January 2010 17:41:24: xmlHttpObj.status = 404

3 attempts for the same file in the same second?

I would think that anyone decent with JavaScript would be able to figure it out. There is a lot of code out there that does the same type of function and its all plain text source.

Well done to dane, for taking the gadget on and if you can't work out some of the code, drop me a PM and i'll see if I can decipher it!!

Super-T · **Posted:** Sun Jan 17, 2010 12:50 am

Steve
In reference to the forecasts as shown on the 3 gadgets i have running temporarily.
There seems to be a problem with the forecast being wildly inaccurate as shown by the first and last gadget, both are fine offset and the centre one is a davis.
Over the last week we have had fairly settled weather, no rain and lots of sun but the forecast has been nowhere near what it is currently.
It may be that the formula doesn't work too readily for Auckland as it is very changeable.
Any thoughts on how to improve the forecasting? Pressure is set to 971 and 1036 in my case.

beteljuice · **Posted:** Sun Jan 17, 2010 1:00 am

The forecasts are actually 1 level too bad, and the "No Forecast" was given the "Fine" graphic.
Ergo forecast is artifically bad and the Davis installation has Cumulus forecast turned 'off' so displays the fine graphic instead of a 'blank'

ib has the fixed code in hand.

Super-T · **Posted:** Sun Jan 17, 2010 1:07 am

Website and C1 screen are showing "Unsettled, some precipitation" when the gadget is as the pic. Suggests the error is coming from C1?

beteljuice · **Posted:** Sun Jan 17, 2010 1:16 am

As I understand it NZ is "Unsettled, some precipitation" and in some areas a lot of precip atm !

Don't forget there are a limited number of graphics which have to show some subtly different forecasts.

Super-T · **Posted:** Sun Jan 17, 2010 4:03 am

Not in Auckland....we are having a drought. South Island is copping the bad weather. :-)

DaveNZ · **Posted:** Sun Jan 17, 2010 7:30 am

Super-T wrote:

Steve
In reference to the forecasts as shown on the 3 gadgets i have running temporarily.
There seems to be a problem with the forecast being wildly inaccurate as shown by the first and last gadget, both are fine offset and the centre one is a davis.
Over the last week we have had fairly settled weather, no rain and lots of sun but the forecast has been nowhere near what it is currently.
It may be that the formula doesn't work too readily for Auckland as it is very changeable.
Any thoughts on how to improve the forecasting? Pressure is set to 971 and 1036 in my case.

Yes, despite lowish pressures (1000-1008 hPa) the last several days, weather has actually been reasonably settled. Those pressure values usually correlate with unsettled conditions here. I suspect its the pressure that is throwing the forecasts off...my Davis forecast has also been incorrect for several days, quite often mentioning things like precipitation likely, possibly heavy, windy.

	It is currently Wed May 22, 2013 2:32 pm
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1076 - May 12 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

Cumulus Realtime Gadget

Who is online