V1.9.1 beta -- Graphs not processing

JennyLeez · **Posted:** Sun Oct 10, 2010 11:45 am

Hi,
Have spent the last few days playing with 1.91 beta.
Love all the new features especially the new humidity webtags.
Everything runs smoothly and no problems along side the Toolbox.

I do have 1 glitch alas and this is concerning the graphs. They upload fine but they are not processing (updated) at all.

I tried deleting all in local folder but then I just dont have any graphs at all. So I put them back manually.
I tried deleting them on my server but still graphs are not the latest conditions.

I have worked out though if I view the graphs from the Cumulus Toolbar: View - Graphs
this will update them. But then they do not update (process) again, unless I go back to Cumulus Toolbar and View - Graphs.
Then they will process (update)

They upload is fine, no problems there, but Cumulus is just uploading the same old graphs that have not been updated.

I have installed the new beta version on 2 computers and both are doing the same.

If anyone has any ideas concerning this I would appreciate any help.
I have reverted back to previous version but would love to use 1.91 with all the new great features.
Many thanks
Jen

steve · **Posted:** Sun Oct 10, 2010 1:13 pm

It's probably getting an error while creating one of the images; but I don't know why viewing the graphs would fix that. If you zip up the diags folder and attach it, I'll see if there's anything relevant in there. Also turn on the debug log and attach that a few minutes after an upload should have occurred.

JennyLeez · **Posted:** Mon Oct 11, 2010 5:25 am

Many thanks for your help.
I have not viewed the Graphs from the Cumulus Panel since yesterday and now the Graphs showing online are a day out.

But no hurry as I am using 1.91 on a different computer for testing and then revert back to the nice stable 1.90

I attach files as requested.
Many thanks

Cheers
Jenny

steve · **Posted:** Mon Oct 11, 2010 7:31 am

It's as I suspected; Cumulus gets an error while trying to create the files:

0124.359 : Error creating graph files: Access violation at address 0040522F in module 'cumulus.exe'. Write of address 00000000

I don't understand why viewing the graphs fixes it for the next update, nor why no-one else apparently has the same problem. Have you used the new facility to hide any of the temperature lines? Do you have the 'freezing line' option set?

Paul C · **Posted:** Mon Oct 11, 2010 11:44 am

Looks similar to my problem

Error creating graph files: Access violation at address 0040522F in module 'cumulus.exe'. Write of address 00000000

tks

steve · **Posted:** Mon Oct 11, 2010 11:55 am

One thing you have in common is XP SP3. But I've tried it on that and can't reproduce it.

JennyLeez · **Posted:** Tue Oct 12, 2010 12:17 am

Hi Steve,
I have the freezing line off as do not need here.
I tried disabling the different temp valves after reading one of the other posts.
I set graphs same as version 1.90.
I tried enabling all features.
I ran out of ideas and hence my posting here.
I have windows 7 but Cam does not work on this windows version.
Vista I would not touch with a barge pole

Cheers

steve · **Posted:** Tue Oct 12, 2010 6:55 am

My XP test isn't a thorough as it could be - I'm using XP mode in Windows 7, and it doesn't support USB HID devices like the Fine Offset that's connected to this PC. So it won't actually have any data to plot. I'll try a better simulation when I get chance with a TCP/IP connection to my Davis station.

I suspect this will turn out to be another bug in the new version of the charting component; there seem to be a number...

JennyLeez · **Posted:** Tue Oct 12, 2010 10:49 am

Many thanks Steve, hope you sort it out.
I love the new features.
Keep up the good work, much appreciated

steve · **Posted:** Tue Oct 12, 2010 4:06 pm

I've tried this 'for real' now, and still can't get it to fail. Could you let me have your 1.9.1 cumulus.ini file, and I'll see if that helps.

Paul C · **Posted:** Tue Oct 12, 2010 4:48 pm

Can send my "ini" if required ?

steve · **Posted:** Tue Oct 12, 2010 4:54 pm

Yes, yours will do fine

Paul C · **Posted:** Tue Oct 12, 2010 5:10 pm

Best confirm which one exactly

you know what I'm like

steve · **Posted:** Tue Oct 12, 2010 5:16 pm

The cumulus.ini file from your Cumulus 1.9.1 installation folder.

steve · **Posted:** Tue Oct 12, 2010 7:00 pm

The good news is that with your ini file I can reproduce the problem; it does seem to be a problem with the chart component. What I can't work out is which of your settings causes the problem and why.

As a work around, try setting the 'resize' options for 'web graphs' in the internet settings. You can leave the size at 700x350. It means you lose quality on the images (because of yet another bug in the chart component!), but it stops the original problem occurring.

	It is currently Sat May 18, 2013 12:32 pm
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1076 - May 12 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

V1.9.1 beta -- Graphs not processing

Who is online