Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

Anemometer calculations

For discussion of DIY weather equipment - sensors, accessories, improvements to existing kit etc
Post Reply
Charlie
Posts: 363
Joined: Thu 04 Feb 2010 12:22 pm
Weather Station: 1wire-Cumulus & Fine Offset
Operating System: Windows 7
Location: Whitehorse, Yukon Territory, Canada

Anemometer calculations

Post by Charlie »

I’m playing at building my own weather station and I have most of the sensors sorted out, but how to calibrate the anemometer escapes me. It’s easy to make something that spins in the wind and electronically count revolutions, but how do you map those revolutions to actual wind parameters? Does anybody know the relationships? Most sensors seem to be a horizontal axis “wheel” with 3 cups. Cup area is a variable, but apart from resistance to starting, does it matter? How about the diameter of the “wheel”? Is the circumference related to wind run?
A magazine article I read a few years back suggested an empirical calibration by strapping the prototype to the roof of your car and driving at fixed speeds on a calm day while someone records the counts, but I have to think there is a method less prone to error… and hopefully some basic relationships were worked out long ago!
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Anemometer calculations

Post by steve »

I think the main factor is the diameter of the wheel. If you liken it to the wheels of a car travelling along a road, then for a given speed, smaller wheels will make more rotations in a given time than larger wheels.

You can work out the theoretical relationship between wind speed and revolutions for a given diameter/circumference; for example an anemometer with a diameter of 10cm will make about 3 revolutions per second with a wind speed of 1 m/s. I think :). But I also think that you would have to calibrate it empirically - somehow.
Steve
Charlie
Posts: 363
Joined: Thu 04 Feb 2010 12:22 pm
Weather Station: 1wire-Cumulus & Fine Offset
Operating System: Windows 7
Location: Whitehorse, Yukon Territory, Canada

Re: Anemometer calculations

Post by Charlie »

So you are suggesting that, ignoring friction, you simply assume the cup is travelling at the same speed as the wind. In your example, the wind molecules move 1 meter in 1 second, hence so does the cup. Since the cup is on the circumference of a circle (which = pi * d) then for a cup to travel 1 meter on a 10 cm diameter wheel will make 3 revolutions (or within 5% anyway).
That makes perfect sense. So then the size of the cup is all about overcoming the friction in the bearings (and resistance caused by the other cups). I suspect there is little you can do about the friction in the bearings, but there must be a formula to account for the resistance of the other 2 cups?
wd40
Posts: 448
Joined: Thu 05 Aug 2010 10:02 pm
Weather Station: WS2080
Operating System: W7
Location: GA, USA
Contact:

Re: Anemometer calculations

Post by wd40 »

I think this might solve your problem. I stumbled cross this on the Davis site. For 12 bucks, it would give you a good base.

http://www.davisnet.com/weather/product ... num=07903S

Randy
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Anemometer calculations

Post by steve »

I was going to mention the fact that you can get alternative smaller cups for the Davis stations, depending on the max wind speeds that you expect. I don't know whether the diameter of the whole assembly is different, or just the cups, but presumably these cups rotate at a slower rate for a given wind speed - you have to tell the console that you're using them.
Steve
Gina
Posts: 1885
Joined: Sat 21 Feb 2009 12:41 pm
Weather Station: Nothing working ATM - making one
Operating System: OS X, Linux Mint, Win7 & XP
Location: Devon UK

Re: Anemometer calculations

Post by Gina »

I'm thinking of making my own anemometer (some time in the future) and was wondering about the calibration. First off I considered putting both it and the F.O. anemometer near to each other and roughly calibrating the new one with the F.O. one. Now this is probably a case of "the blind leading the blind" but it would be a start. I very much doubt you can just assume the cups velocity is the same as the velocity of the wind at right angles to the spokes - only that it must be some factor lower. I'm sure there must be a formula that someone has worked out for this. I presume you've tried Google et. al.? I haven't yet.
Gina

Sorry, no banner - weather station out of action. Hoping to be up and running with a new home-made one soon.
Gina
Posts: 1885
Joined: Sat 21 Feb 2009 12:41 pm
Weather Station: Nothing working ATM - making one
Operating System: OS X, Linux Mint, Win7 & XP
Location: Devon UK

Re: Anemometer calculations

Post by Gina »

I have now and not found anything useful :(
Gina

Sorry, no banner - weather station out of action. Hoping to be up and running with a new home-made one soon.
User avatar
mcrossley
Posts: 12692
Joined: Thu 07 Jan 2010 9:44 pm
Weather Station: Davis VP2/WLL
Operating System: Bullseye Lite rPi
Location: Wilmslow, Cheshire, UK
Contact:

Re: Anemometer calculations

Post by mcrossley »

From Wikipedia...

"... the ratio of the speed of the wind and that of the cups, the anemometer factor, depends on the dimensions of the cups and arms, and may have a value between two and a little over three."

http://en.wikipedia.org/wiki/Anemometer
User avatar
Ned
Posts: 258
Joined: Mon 19 Jul 2010 11:15 am
Weather Station: WS2083 (aspirated)
Operating System: Win 10
Location: Auckland NZ

Re: Anemometer calculations

Post by Ned »

Even when set by some theoretical model, the instrument should be calibrated in a known working environment. So if you are able to borrow or even hire an anemometer as used by air conditioning engineers and using a steady air stream from a fan, so much the better.
Charlie
Posts: 363
Joined: Thu 04 Feb 2010 12:22 pm
Weather Station: 1wire-Cumulus & Fine Offset
Operating System: Windows 7
Location: Whitehorse, Yukon Territory, Canada

Re: Anemometer calculations

Post by Charlie »

mcrossley wrote:From Wikipedia...

"... the ratio of the speed of the wind and that of the cups, the anemometer factor, depends on the dimensions of the cups and arms, and may have a value between two and a little over three."

http://en.wikipedia.org/wiki/Anemometer
This is an interesting article.
Now if they had included the actual formula, instead of "depends on the dimensions of the cups and arms", the question would have been answered.
At any rate, assuming the article is true, then a 3 cup anemometer will be linear, so calibrating against a fan with a couple speeds should be sufficient. It would be nice however, to simply be confirming the math, rather than trying to experimentally derive it! (Especially since, according th the article, it does exist)
Gina
Posts: 1885
Joined: Sat 21 Feb 2009 12:41 pm
Weather Station: Nothing working ATM - making one
Operating System: OS X, Linux Mint, Win7 & XP
Location: Devon UK

Re: Anemometer calculations

Post by Gina »

Charlie wrote:This is an interesting article.
Now if they had included the actual formula, instead of "depends on the dimensions of the cups and arms", the question would have been answered.
At any rate, assuming the article is true, then a 3 cup anemometer will be linear, so calibrating against a fan with a couple speeds should be sufficient. It would be nice however, to simply be confirming the math, rather than trying to experimentally derive it! (Especially since, according th the article, it does exist)
Yes, exactly what I was thinking! There is a formula, it may not be very accurate but better than nothing. I want to know what it is too.
Gina

Sorry, no banner - weather station out of action. Hoping to be up and running with a new home-made one soon.
User avatar
hans
Posts: 171
Joined: Sun 18 Jan 2009 9:27 pm
Weather Station: wh1080 /ws4000(alecto)
Operating System: Windows 10 64 bit
Location: leiden,Netherlands
Contact:

Re: Anemometer calculations

Post by hans »

here are a few:

WS=1.25C/T

WS=wind speed in miles per hour
C=counts
T=time interval over which counts are measured(seconds)

or

To determine wind speed in miles per hour (mph), use this formula: calculate the circumference of your anemometer by multiplying the diameter (or distance between opposing scoops) in feet times pi (or 3.14). Multiply this number times the number of revolutions per minute to get the number of feet per minute (fpm) one scoop travels. By multiplying rpm by 60 (minutes per hour) and dividing this number by 5280 (feet per mile), you will get an approximate wind speed in miles per hour.
Gina
Posts: 1885
Joined: Sat 21 Feb 2009 12:41 pm
Weather Station: Nothing working ATM - making one
Operating System: OS X, Linux Mint, Win7 & XP
Location: Devon UK

Re: Anemometer calculations

Post by Gina »

While checking out 1-wire I came across that first formula on the HobbyBoards site for their anemometer kit. Here's the PDF http://www.hobby-boards.com/catalog/lin ... Manual.pdf and here's their hardware - familiar, what??? :lol:
Screenshot-11a.png
You do not have the required permissions to view the files attached to this post.
Gina

Sorry, no banner - weather station out of action. Hoping to be up and running with a new home-made one soon.
User avatar
hans
Posts: 171
Joined: Sun 18 Jan 2009 9:27 pm
Weather Station: wh1080 /ws4000(alecto)
Operating System: Windows 10 64 bit
Location: leiden,Netherlands
Contact:

Re: Anemometer calculations

Post by hans »

small world :D
brassing
Posts: 35
Joined: Sun 05 Dec 2010 12:39 pm
Weather Station: Fine Offset
Operating System: Vista SP2
Location: Woking surrey

Re: Anemometer calculations

Post by brassing »

I posted the post below on the Fine Offset forum when I hadn't realised there was a similar thread here so I am reposting here.

It seems that the Fine Offset measures wind speed over 24 2 s intervals during its 48 s reporting period. The maximum of these measurements is reported as the gust speed. If you examine the gust speeds you see that they are all multiples of 0.34 m/s (or the equivalent in other units). Thus 0.34 m/s must presumably correspond to 1 pulse from the anemometer in 2 s. Since the anemometer has only one magnet and one sensor it gives one pulse per rev. The diameter of the anemometer is 140 mm (at the cup centres) so a bit of maths shows that at 0.34 m/s wind speed the cups are rotating at Pi x 140 / 2 /1000 m/s = 0.22 m/s.

I know very little about anemometer theory (just what I found in 30 min web research) but it seems the ratio of wind speed to cup speed is known as the anemometer factor and for 3 cup anemometers it varies between 2 and just over 3. The figures above give an anemometer factor of 0.34 / 0.22 = 1.56 which is well outside the expected range.

Either the Fine Offset anemometer is unusually efficient or there is something wrong with my logic. Does anyone have any idea where the discrepancy comes from?

(I have to admit that the value of 2 to just over 3 is found on various websites but without any source. The wording is almost identical on each site which indicates a single primary source, which might well be unreliable.)


Following on from that post I have a couple of further points:

The formula WS = 1.25 C/T mph quoted above by hans from the Hobbyboards site for an anemometer that appears identical to the Fine Offset one leads to an anemometer factor of 1.27 which must surely be wrong - much too low. Maybe the photo of the anemometer is wrong and the one they sell has a smaller rotor.

I have a datasheet for a Vector Instruments R30 rotor for their A100 anemometer (http://www.windspeed.co.uk/ws/index.php ... &Itemid=48). This is an instrument grade anemometer intended for professional use. It quotes a "Rotal Calibration" of 47.8 rpm / m/s. The rotor has a diameter of 106 mm (across the cup centres). If you do the sums on this you find that 1 rev/s corresponds to 0.333 m/s cup speed and to 1.26 m/s wind speed. This gives an anemometer factor of 3.77 which is a bit higher than the Wikipedia range of 2 to just over 3. The rotor is a 3 cup design with conical rather than hemispherical cups. I don't know what difference that makes but you might expect cup design to make a significant difference. If the cups were replaced by flat plates the anemometer would not turn at all. The anemometer depends on the asymmetry of the cups so the degree of asymmetry will affect the anemometer factor.

I hope I have got the maths right. Someone might like to check!
Post Reply