Sandaysoft

La Crosse 2300

The last two nights (builds 599 / 600 / 601 ?)

Cumulus has recorded a (now) gust of 114.0 mph, which according to the logs (now edited) lasted 4mins first time and 9mins the second.

The console has no such record.

According to todays ini file it was:

[Wind]
Speed=7.31419706344604
SpTime=19:12
Gust=114.08374786377
Time=01:54
Bearing=270
Direction=W
Windrun=38.2645988464355
[Temp]
Low=4.40000009536743
LTime=23:27
High=9.5
HTime=13:50
Total=8538.0986328125
Samples=1188

_________________

......................Imagine, what you will KNOW tomorrow !

Make that 3 days

Part of today.ini

[Wind]
Speed=2.78274989128113
SpTime=00:06
Gust=114.08374786377
Time=02:41
Bearing=292
Direction=WNW
Windrun=2.77032279968262
[Temp]
Low=2.40000009536743
LTime=03:10
High=4.59999990463257
HTime=00:00
Total=655.7001953125
Samples=195

Part of Dec08log.txt

19/12/08,02:41,2.7,96,2.1,1.0,5.8,262,0.0,0.0,1019.9,199.4,24.9,26,0.0
19/12/08,02:42,2.7,96,2.1,2.5,114.0,280,0.0,0.0,1019.9,199.4,24.9,27,0.0
19/12/08,02:43,2.7,96,2.1,2.3,114.0,282,0.0,0.0,1019.9,199.4,24.9,27,2.5
19/12/08,02:44,2.7,96,2.1,2.2,114.0,284,0.0,0.0,1020.0,199.4,25.0,27,0.0
19/12/08,02:45,2.6,96,2.0,2.1,114.0,285,0.0,0.0,1019.9,199.4,25.0,27,0.0
19/12/08,02:46,2.6,96,2.0,2.2,114.0,285,0.0,0.0,1019.9,199.4,25.0,27,0.0
19/12/08,02:47,2.6,96,2.0,2.1,114.0,285,0.0,0.0,1020.0,199.4,25.0,27,0.0
19/12/08,02:48,2.6,96,2.0,2.1,114.0,286,0.0,0.0,1020.1,199.4,25.0,27,2.9
19/12/08,02:49,2.6,96,2.0,2.2,114.0,285,0.0,0.0,1020.0,199.4,25.0,26,0.0
19/12/08,02:50,2.6,96,2.0,2.1,114.0,285,0.0,0.0,1020.0,199.4,25.0,26,4.0
19/12/08,02:51,2.6,96,2.0,2.2,114.0,283,0.0,0.0,1020.0,199.4,25.0,27,0.0
19/12/08,02:52,2.6,96,2.0,0.7,5.1,262,0.0,0.0,1020.0,199.4,25.0,26,0.0

Not quite sure when it started, build 596 seemed OK, 600 definately NOT (currently 601)

Once a day, could it be when it's looking for a time signal ? (and usually failing with mine !)

_________________

......................Imagine, what you will KNOW tomorrow !

Someone else is getting the same value once or twice a day, but I'm struggling to get some diagnostics out of them.

Is Cumulus running at the time this happens - i.e. is it downloaded from the logger or during normal running? If from the logger, please send me the contents of the Diags folder. If during normal running, please turn on the debug log and send me the debug.log file when it happens again.

Edit: I've just had a thought; I removed the check on the wind status byte in build 600 to allow for this unknown 0x08 value. I bet that's the cause of this, the station is probably indicating an error condition (contact lost?). I should probably just allow that value and discard everything else. ( I was following advice from the Open2300 forum).

Thanks,
Steve

Build 602 hopefully fixes this.

Steve

Looking good - I think !

Even though everyone else had high winds, I didn't, at least NOT 114 mph

Thanks

_________________

......................Imagine, what you will KNOW tomorrow !

Update:

Just to confirm, no further 114 wind readings.

It would seem you have discovered a La Crosse WS23** error code for when it is hunting for the time / date synch (and failing)

Hey - you are now a guru in an out of date piece of kit

_________________

......................Imagine, what you will KNOW tomorrow !

Great, thanks. I think I'll let version 1.8.4 escape now as a full release.



I think not! These things are even more baffling to me than the Fine Offset ones.

Steve

I've had this issue for the past two nights, both at 03:23. Cumulus hasn't been running at the time. I'm running 1.8.9 build 910. Whilist it would be nice to reoslve it, it's no big issue - I'm guessing that my WS2350 has dropped the wireless connection temporarily

Please zip and attach the diags folder. It's a gust of exactly 114 mph that you're seeing?

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!

Hi Steve,
Yes exactly 114MPH, interestingly it didn't happen last night (or more coorectly this morning)!

Many Thanks,

Chris

Looking at that could it be that either 111 or 112mph is the maximum recording speed with the other bits used as error bits when bits 4,5 and 6 are on.

_________________
====
Alan

Here's your data from around that time:

05:23:00 Address: 0B4D Data: 62 1A 05 CE 99 89 01 00 00 40
04:23:00 Address: 0B3A Data: 1F 3C 4F CE 99 AA 01 E0 1F 20
03:23:00 Address: 0B27 Data: 21 3C EF CE 99 AA 01 E0 1F F0
02:23:00 Address: 0B14 Data: 34 22 65 CF 99 87 01 00 00 10

Your wind speed for 03:23 and 04:23 are both showing 1FE = 51.0 m/s. Apparently the max speed in the WS2300 spec is 49.9 m/s = 1F3. So I guess 1FE is an error indication (note that your outdoor humidity is 110 at this time, also presumably an error value). There's nothing about this in the Open2300 memory map.

So I guess I need to put in a check to ignore wind speed values over 49.9 m/s in the history data (there doesn't seem to be an additional error flag as there is with live data).

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!

Thanks Steve, and RCE, for the prompt responses.

Chris

I have just had similar I think...

Today at 00:32

All time high wind gust 128MPH

All time high daily rain 10472mm


Easyweather seems to show the same wind gust (well 127.7mph), but not the rain fall.

Attached are what I think are the relevant files.

Machine is XP running version 1.8.9 build 890

_________________
====
Alan

This is a La Crosse WS23xx specific problem

_________________

......................Imagine, what you will KNOW tomorrow !