Welcome to the Cumulus Support forum.

Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024

Cumulus MX V4 beta test release 4.0.0 (build 4018) - 28 March 2024

Legacy Cumulus 1 release v1.9.4 (build 1099) - 28 November 2014 (a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)

Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki

Cumulus 1.8.5 beta available

General news concerning announcements of new releases, forum outages etc.
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Cumulus 1.8.5 beta available

Post by steve »

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Tweaked WS2300 serial port code a bit
- Attempt to fix startup problem when shut down just before midnight
- Stopped old backups going into recycle bin
- Added support for Twitter (http://www.twitter.com)
- Ini file option to disable duplicate first data line check (Fine Offset)

Steve
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 631 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Changed wind gauge so it continues to re-scale up to a max of 200
- Allowed main window to be resized smaller (with scroll bars)
- Added printer selection dialogue to Print function
- Added print function to Graphs form
- Added archive data count to status bar
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 633 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Prevent crash when no printer installed
- Fix problem with all-time low pressure when offset in use
- Fix wrong times for some of today's extremes
- Added undocumented experimental main window resizing
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 636 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Add WMR928 extra sensor display
- Extra debugging for Fine Offset rain rate
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 654 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Fixed 'ghost' rain rate just after startup
- Added wind chill to logs and graphs
- Fixed a problem with the internet settings screen introduced in a previous beta
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 656 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Fixed some problems with dewpoint and windchill on Fine Offset
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 664 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Added UV and Solar Rad to Wunderground and PWSweather updates
- Add offset facility for inside temperature
- Don't put leading slash on realtime.txt path if ftp directory is blank
- Attempt to detect WS2300 sensors disconnected
- Fix a missing day rollover problem
- Changed temperature chart so temperature line is always on top
- Removed temperature cutoff from chill calc (switch back on using ini file)
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 670 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Attempt to cater for displays less than 1024x768
- Added APRS humidity cutoff for quirky OS sensors (set via ini file)
- More filtering for bad WS2300 data
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 674 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Fixed WS2300 bad pressure data check for "in Hg" units
- Allow for rain multiplier at rollover (incorrect this month and year displayed)

Steve
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 688 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Correct WS2300 rain total when gauge (but not console) has been reset
- Allow manual input of Fine Offset pressure offset (set via ini file)

Steve
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 690 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

Cater for Fine Offset humidity 'underflow' (less than 10%) value of FF

Steve
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 699 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Options to not send UV and SolarRad to Weather Underground and PWS Weather (see Internet settings)
- Clock now has 12-hour display option (click on it)

Note: The default for sending UV and Solar radiation to WU and PWS Weather is 'NO'. You will therefore need to change the setting if you have the relevant sensors and you want to continue sending the data.

Steve
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 701 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

- Changed extra file processing to use unique filename for each file
- Added support for Vantage Pro USB and TCP/IP connection

Note that when you change your Vantage Pro connection type, you will need to restart Cumulus.

Steve
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 708 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

Fixes for new Vantage Pro DLL changes:

- Fixed incorrect check on serial port for non-serial connections
- Fixed display of indoor temperature
- Fixed cold start problem

Steve
User avatar
steve
Cumulus Author
Posts: 26702
Joined: Mon 02 Jun 2008 6:49 pm
Weather Station: None
Operating System: None
Location: Vienne, France
Contact:

Re: Cumulus 1.8.5 beta available

Post by steve »

Build 717 available:

http://www.nybbles.co.uk/downloads/beta ... sSetup.exe

Fixed another cold start problem with the new Vantage Pro DLL.

Steve
Post Reply