Sandaysoft

This morning I started my PC after it was off overnight and Cumulus 1.9.2 presented the following error.

30/08/2011 08:33:58 : Check station clock, date of last archive entry is quite old

I have restarted Cumulus a couple of times and get the error each time.

I then updated my v1.9.2 to build 1009 but still get the same error.

The PC clock is spot on and the station clock is within a minute - actually it is slightly fast (so much for sync with a time signal).

I have a Windows 7 PC. My station is a WS2300.

I've attached the diags and data folder. I'm sure there must be a manual tweak that will convince the program that everything is back to normal

Andrew

Your station's clock is apparently in the year 2000:

30/08/2011 08:42:58.574 : Date and time of latest archive entry:
30/08/2011 08:42:58.574 : hr=8 min=17 d=30 m=8 y=2000
30/08/2011 08:42:58.577 : Check station clock, date of last archive entry is quite old

There's an option in 1.9.2. to ignore the WS2300 station clock.

You're using COM port 11 - is that a real COM port or a serial/USB adapter? I notice that you are getting a lot of data errors.

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!

Thanks for the heads up. I'll manually reset the clock. But no doubt the time signal will reset it at some point

Yes, the WS2300 connects via a serial/USB adapter. I'm considering a new station as I type.

Andrew

I'm afraid I don't support that combination.



Good

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!