v1.8.0

TgT · **Posted:** Wed Sep 24, 2008 10:07 pm

Oi there!

Today I`ve been trying out this new version and found the problem under graphs menu.
When im trying to zoom in the wind graphs aplication simply crashes.
Also the wind average points are the same as wind direction points after restart of the program. Reading wrong line from logs?

Didnt find out anything else, yet.

Edit: Happens with 1.7.17 also.

TNETWeather · **Posted:** Wed Sep 24, 2008 10:25 pm

When you say, zoom in, are you "selecting" the graph so it shows in the large image?

steve · **Posted:** Thu Sep 25, 2008 7:25 am

TgT wrote:

Also the wind average points are the same as wind direction points after restart of the program. Reading wrong line from logs?

Assuming you have a Fine Offset type station, it only stores one wind direction in the logger, so Cumulus simply displays that one twice. It could work out an average as it goes, I suppose; I can add that in a later release.

Steve

TgT · **Posted:** Thu Sep 25, 2008 11:54 am

TNETWeather wrote:

When you say, zoom in, are you "selecting" the graph so it shows in the large image?

Yes, first clickling on small one then on big one click+down/right to zoom in and it crashes.

steve wrote:

TgT wrote:

Also the wind average points are the same as wind direction points after restart of the program. Reading wrong line from logs?

Assuming you have a Fine Offset type station, it only stores one wind direction in the logger, so Cumulus simply displays that one twice. It could work out an average as it goes, I suppose; I can add that in a later release.

Steve

WMR928

steve · **Posted:** Thu Sep 25, 2008 1:00 pm

TgT wrote:

Yes, first clickling on small one then on big one click+down/right to zoom in

I'd forgotten it did that

Quote:

and it crashes.

Works fine for me, on a Vista machine and an XP machine. Do you get a 'bug report' dialog? Could you send me the bug report (you'll have to save it then email it to me - steve@sandaysoft.com - I disabled the 'email' facility in 1.8.0).

Quote:

WMR928

Yes, I lied

It's because Cumulus only saves one wind direction in its data files, and it uses that to populate the graphs at startup.

Steve

dane · **Posted:** Thu Sep 25, 2008 1:14 pm

I experienced the same crash when zooming in on the wind direction graph.
Have opened a ticket in the tracking system.
Ib

steve · **Posted:** Thu Sep 25, 2008 1:33 pm

Thanks - I can reproduce that with the wind direction graph (same with the small one). TgT - is it the wind direction graph that causes you the problem?

Steve

TNETWeather · **Posted:** Thu Sep 25, 2008 2:11 pm

I would not have figured that one out.

Works okay for all graphs except wind direction. Then it blows up.

steve · **Posted:** Thu Sep 25, 2008 2:21 pm

Fixed in 1.8.1

TgT · **Posted:** Thu Sep 25, 2008 4:40 pm

Now lets wait till then :mrgreen:

bpsmicro · **Posted:** Thu Sep 25, 2008 9:06 pm

I haven't seen mention in the changelogs, so I'll ask here: have you made any progress towards dumping out a WXNOW.txt file suitable for use by UI-View (and others I'd assume)? I'm basically not able to switch from WeatherLink until I get that functionality, but I'm monitoring here in hope it'll come, because I like almost everything else about Cumulus. :-)

Brad.
VE3BSM

TNETWeather · **Posted:** Fri Sep 26, 2008 2:07 am

Can someone post or PM me with a URL that points to a live WXNOW.txt file.

steve · **Posted:** Fri Sep 26, 2008 7:15 am

I tried to find one and failed. I was also in communication with Gerry Creager, who was going to help me, but some hurricanes came along and he had work to do!

Steve

bpsmicro · **Posted:** Tue Sep 30, 2008 3:58 pm

Apologies for the delay in responding. I posted the WXNOW format info in the thread at viewtopic.php?f=4&t=42

Actual files are usually not posted anywhere, but I can see about rigging my setup to copy the one I generate with my WeatherLink add-in so that you can get at it directly.

Brad.

TNETWeather · **Posted:** Tue Sep 30, 2008 4:18 pm

I think that spec is good enough... I will give it a try a bit later. Should be easy to generate from the realtime.txt data.

	It is currently Sun May 19, 2013 2:52 am
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1076 - May 12 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

v1.8.0

Who is online