No downloading data from Davis data logger

meteolarissa · **Posted:** Fri Dec 02, 2011 12:26 am

I have Vantage pro2 6153 model with usb data logger and i just installed cumulus for 1st time. It start read the current data so i thought to close it and open again so download the full of archive data logger data. And i saw the download box but nothing.0 Downloaded sets and i get this problem txt. I attach it so research about it and maybe give me the <lights> to solve it.

Thank you

Vassilis

LARISA-GREECE

steve · **Posted:** Fri Dec 02, 2011 8:15 am

That crash isn't related to your problem, it's because you've used the dayfile.txt editor and you don't have a dayfile.txt yet.

If you zip up the diags folder and attach it, I'll take a look.

meteolarissa · **Posted:** Fri Dec 02, 2011 8:27 am

Steve goodmorning,

Today it downloaded all data so i dnt think its anymore problem.
I will wait 2-3 days to see if all is Ok, so maybe i was wrong to post about this.
Anyway i send you this file cuz i get many error flashes and to the log i see same text like before.

Bye for now,

Vassilis

steve · **Posted:** Fri Dec 02, 2011 9:10 am

In this build I have just added lots of new error messages to try to avoid the situation where people keep posting asking what they do about the message which says there is a problem at line N in dayfile.txt, including flashing the error light. It's possible that this means that the error light will also flash on the first day that you run Cumulus, when there is no dayfile.txt file. Could you have a look in your data folder to see if you have one, please?

When I get chance I will have to do a clean installation to see what effect the recent changes I've done have on 'day one' systems.

meteolarissa · **Posted:** Fri Dec 02, 2011 12:40 pm

Ι'm here again,

I have dayfile.txt file with nothing inside...its blank...and i have and one file Δεκ11log in which i see all today data from 2am till now 2pm inside and keep write now data every 10minutes interval.
*Δεκ its December in greek

I think i will see next days if any texts inside dayfile.txt and inform you.

Anyway thank you keep trying solve these Line errors and make more stable Cumulus.

Vassilis
Larissa-Greece

mcrossley · **Posted:** Fri Dec 02, 2011 1:16 pm

The dayfile will not be written to until Cumulus performs one 'roll-over'. That file contains one line for each day in the past since Cumulus started.

steve · **Posted:** Fri Dec 02, 2011 2:25 pm

You shouldn't have a blank dayfile.txt file, I suspect that's a result of using the dayfile.txt editor. I should add a warning with Cumulus (which no-one will read), which says "Don't experiment with Cumulus facilities on the first day!".

But it's OK that you're trying things out, just don't expect some of the facilities to work properly until you have a full day's worth of data.

	It is currently Tue May 21, 2013 9:12 pm
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1076 - May 12 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

No downloading data from Davis data logger

Who is online