APRS display

Richard1295 · **Posted:** Fri Mar 09, 2012 10:12 am

Hi,

Where is the comment text in the aprs information bubble changed in Cumulus?

The attached file shows this text as eCumulusFO.

Richard

steve · **Posted:** Fri Mar 09, 2012 10:45 am

It's not configurable. It's one of the parameters to the data upload, as defined here: http://weather.gladstonefamily.net/aprswxnet.html

It identifies the software and hardware in use. Re-reading that page, it looks like it ought to include the Cumulus version too. The 'e' isn't part of the data, it's the identifier for the parameter, so whatever that is that you've shown shouldn't be displaying the 'e'. I think the idea is that software should parse the string and display something sensible, rather than the string itself.

Unless I've misunderstood the spec, of course.

beteljuice · **Posted:** Fri Mar 09, 2012 11:45 am

Seems to be a straight forward string to describe the kit (no pre-fix or suffix)

http://www.wxqa.com/activecwd/C20120309.txt

steve · **Posted:** Fri Mar 09, 2012 12:03 pm

So what is the 'e' for on the page which is supposed to be the official spec (AFAIAA)? I note that WUHU also uses it.

But in any case, even without the 'e', the strings aren't particularly descriptive.

Richard1295 · **Posted:** Fri Mar 09, 2012 7:33 pm

Hi Steve,

I got this reply from the gladstone site:

---------------------------------------------

You'll have to ask that question to the author of aprs.fi as I don't know how his parser works. But, looking here,

http://www.findu.com/cgi-bin/find.cgi?call=mb7usy-1

I note that the model of the weather station is not contained in the packet, so I don't see how anyone would know the model number.

Russ

------------------------------------

so don't really know where to go now.

Richard.

steve · **Posted:** Fri Mar 09, 2012 7:42 pm

I don't really understand that reply. I've encoded the station model as 'FO' = Fine offset. I suspect that I couldn't find an existing abbreviation, so used that. What's missing is the Cumulus version number. But as other software doesn't seem to be adhering to any spec that I've seen, I'm not sure that matters.

Looking at other sites on aprs.fi, all it seems to do is print whatever's on the end of the packet, so pretty much all sites have what is effectively junk.

Is this actually causing a problem?

mcrossley · **Posted:** Fri Mar 09, 2012 8:37 pm

I may be getting this all wrong but doesn't the official spec. on page 63 say the first character is the software followed by 2-4 characters identifying the weather station hardware? Or is that the wrong spec?

http://aprs.org/doc/APRS101.PDF

Quote:

APRS Software
Type
A Weather Report may contain a single-character code S for the type of
APRS software that is running at the weather station:
d = APRSdos
M = MacAPRS
P = pocketAPRS
S = APRS+SA
W = WinAPRS
X = X-APRS (Linux)
Weather Unit
Type
A Weather Report may contain a 2–4 character code uuuu for the type of
weather station unit. The following codes have been allocated:
Dvs = Davis
HKT = Heathkit
PIC = PIC device
RSW = Radio Shack
U-II = Original Ultimeter U-II (auto mode)
U2R = Original Ultimeter U-II (remote mode)
U2k = Ultimeter 500/2000
U2kr = Remote Ultimeter logger
U5 = Ultimeter 500
Upkm = Remote Ultimeter packet mode
Users may specify any other 2–4 character code for devices not in this list.

Richard1295 · **Posted:** Fri Mar 09, 2012 11:09 pm

Steve, it's not causing a problem; I just thought I could put some information in that space, such as the weather station model (which is W-8681, not a Fine Offset).

It's just that I don't like mysteries, so thought I'd ask.

I also didn't understand the answer I got from Russ on the gladstone site.

steve · **Posted:** Sat Mar 10, 2012 10:46 am

I could make it so the string at the end is more descriptive, but I'm reluctant to change anything without a proper spec. The 'S' parameter isn't mentioned on Philip Gladstone's site, for example.

A W-8681 is a Fine Offset; they're the manufacturers.

	It is currently Sun May 26, 2013 4:39 am
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1078 - May 24 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

APRS display

Who is online