Many errors since yesterday.. Ignoring sensors. (solved)

OliII · **Posted:** Wed May 23, 2012 7:02 pm

Hi !
Since yesterday, i've many errors with my station and Cumulus.
See these here :

My station display and update the temperature, pression, rain and wind sucessfully (as seen on the display) but, on cumulus, data stop.
Here's the debug file.

Attachment:

debug.zip

When i disconnect the cable from the station, data recording will resume, but, after 30 minutes (or more than 4 hours), data stop again.
If i close Cumulus, the process will take a long moment, and the launch too... with reading data pannel.
Station WS-2308 connected to the XP computer with original Lacrosse cable, without usb adapter.

steve · **Posted:** Wed May 23, 2012 7:40 pm

All I can suggest is:

1. Make sure your serial port is set to: Baudrate 2400, Bits 8, Parity None, Stopbits 1
2. Try a different serial cable.

To quote the Open2300 web site: "When reading and writing to the WS 2300 the communication often fails. The station simply does not see RS232 communication as first priority and refuses to answer when it does something else. Errors happen quite often."

Cumulus retries each read a number of times; sometimes reading a set of data can take several minutes. It usually manages to get data from the station eventually. At the end of your debug log, it was getting no response from the station at all.

OliII · **Posted:** Thu May 24, 2012 7:38 am

Ok, Steeve, just after your repy, i've checked these settings and see that BaudRate was at 9600 ...Changing for 2400 and since the changes, no more problems.
Also, i remember that : when i use HeavyWeather, i've set the Interval time at 10 minutes (for history.dat). I don't know if this setting will have any consequence for my WS-2308 (the station can store many historic data), but, at this time, everything is OK
thank you ! :clap:

OliII · **Posted:** Thu May 24, 2012 9:51 pm

again... from 7pm , got many errors.
sometimes every 10 minutes (approximatively), sometimes, nothing in two hours...

steve · **Posted:** Fri May 25, 2012 7:11 am

I can't think of anything else to suggest, sorry.

OliII · **Posted:** Fri May 25, 2012 8:43 am

I think that i've maybe find the problem..
Yesterday, at 7pm, i begin to use my netbook in my garden, near the thermo/athmospheric sensor ... and the problems begins at same time. Sensor was just 1,5m around my pc..
When i leave, at midnight (we have pretty weather here at this time), problems stopped. And no more errors since midnight.
I think that's my Wifi connection witch creates disturbances with the sensor, who is wireless connected to the station. Every time i use my netbook near the sensor, or around the station, i get errors from the station.

	It is currently Wed Jun 19, 2013 12:53 pm
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1080 - Jun 03 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

Many errors since yesterday.. Ignoring sensors. (solved)

Who is online