UV graf on the webbsite?

hala · **Posted:** Sun May 13, 2012 7:35 pm

I like to pressent a UV graf on my Cumulus webpage. Maybe by remove one of the 10 grafes and make it show UV insteade.
Is i possible? If yes how can I get this done? In Cumulus program I get a graf under "View > Select A graf" then check "UV graf".
I use an Oregon WMR200.
Regardes hala

steve · **Posted:** Sun May 13, 2012 8:04 pm

No, sorry, not automatically. But an enhancement request (see links above) does exist for this (several separate requests, actually, for some strange reason), so it's possible I'll add it at some point.

SJG1976 · **Posted:** Fri Jun 01, 2012 6:32 pm

Thanks for getting the UV graphs on there on the latest release.

This is a great addition in my opinion.
Thankyou Steve :clap:

steve · **Posted:** Fri Jun 01, 2012 6:39 pm

I've just had a look at your graph (as I don't have a UV sensor myself) and I see that the auto-scaling is making the Y-axis go below zero; I thought I had told it not to do that, but clearly not - I'll fix it.

gemini06720 · **Posted:** Sat Jun 02, 2012 8:16 am

Steve if you need to check the results of the new graphics (ie: UV Index, Solar Radiation and Daily Sunshine Hours), you can look at my Trend Graphics page - the three new graphics are near the bottom of the screen.

steve · **Posted:** Sat Jun 02, 2012 8:39 am

Thanks, Ray, but I can't use http://localhost/cumulus/trends.php to get to your machine

gemini06720 · **Posted:** Sat Jun 02, 2012 10:41 am

Oops...

But, but, clicking on the link in your message and I can see the page in my browser... :mrgreen:

I was adding the new tags and modifying some files on my development computer and, without thinking, just copied the link I had in my browser... :roll:

Here is the appropriate link to my [link removed] page...

This one should be better...

steve · **Posted:** Sat Jun 02, 2012 11:26 am

Thanks - I'll have another look after I've released - and you've installed - the fix for the UV graph Y-axis.

gemini06720 · **Posted:** Sat Jun 02, 2012 11:39 am

What!

Something not right (or wrong) with the Y-axis of the UV graphic! :roll:

By the way, I do not think the UV index/value should be less than zero - one being the minimum value on the UV index scale:

Attachment:

UVI_maplegend_H.gif

Am I right in presuming the Y-axis of the UV graphic will be self-adjusting as is the case with the Y-axis of the temperature graphic (for example).

steve · **Posted:** Sat Jun 02, 2012 12:33 pm

gemini06720 wrote:

By the way, I do not think the UV index/value should be less than zero

That's right, that's the problem with the graph - I've allowed the chart software to auto-adjust the minimum axis value rather than fixing it at zero as with the solar rad graph. The maximum should auto-scale.

nitrx · **Posted:** Sat Jun 02, 2012 12:50 pm

This reminds me to the rainrate graph the zero line is in the middle I don't expect negative rain..

mcrossley · **Posted:** Sat Jun 02, 2012 12:53 pm

yep, I never thought about it but its been like that forever. Rain rate that is:-)

gemini06720 · **Posted:** Sat Jun 02, 2012 12:58 pm

nitrx wrote:

This reminds me to the rainrate graph the zero line is in the middle I don't expect negative rain..

Indeed, Ron, I had not noticed that before - whereas the today's rain and daily rain graphics have the zero line at the bottom of the graphic.

Might there be areas/locations, maybe south of the equator, where there are rain rates of negative values...

steve · **Posted:** Sat Jun 02, 2012 1:17 pm

nitrx wrote:

This reminds me to the rainrate graph the zero line is in the middle I don't expect negative rain..

That's the way the chart component draws line charts with zero data, even when the minimum axis value is fixed at zero.

nitrx · **Posted:** Sat Jun 02, 2012 1:25 pm

steve wrote:

That's the way the chart component draws line charts with zero data, even when the minimum axis value is fixed at zero.

I can live with it as long it doesn't go below zero

	It is currently Thu Jun 20, 2013 12:36 pm
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1080 - Jun 03 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

UV graf on the webbsite?

Who is online