Temperature problem after upgrade - F vs. C

JimDantin · **Posted:** Wed Jun 06, 2012 12:51 pm

I've been running Steel Series on my website for quite a while. I decided to upgrade to 1.6.6 and ran into some problems. I'm using gauges-ssT.htm unmodified at this point.

I'm in the US, so I need Fahrenheit rather than Celsius. For some reason the gauge page is displaying the actual temperature VALUE correctly (such as 57.7) but the first two gauges show C and the temperature range is 30-70. The other gauges appear to be in the proper units. I'll accept responsibility for bollixing something up, but I can't even find where I could have done it!

I can't seem to figure out where the units are getting passed to the various java routines.

Another question -- do the gauges auto-scale? what happens if the wind gets above 20mph, or the rain gets above 1"? If they don't autoscale, do I have to change more than just the min/max lines in gauges.js? For example I can change g_rain.maxValue = 1.0;, but do I have to edit anything else?

FYI, my configuration currently uses the SS gauges as distributed:
Local file name: C:\Cumulus\web\gauges-ssT.htm
Remote file name: gauges1.htm

Web page for the gauges is: http://dantinconsulting.com/gauges1.htm

Thanks for a really nice package. I have received compliments on the gauges from a number of users.

Jim

mcrossley · **Posted:** Wed Jun 06, 2012 1:11 pm

OK, the "tempunit" in your realtime file is coming across as just: "tempunit: "°" so no units (C/F), the script then defaults to °C. That is the problem with the temperature gauges.

Yes the gauges do auto-scale. I've tried to set the default values to sensible limits so they show small amounts of rain, low wind speeds reasonably "visually", but the gauges will re-range once the default maximum (and minimum pressure) values are exceeded.

JimDantin · **Posted:** Wed Jun 06, 2012 2:24 pm

mcrossley wrote:

OK, the "tempunit" in your realtime file is coming across as just: "tempunit: "°" so no units (C/F), the script then defaults to °C. That is the problem with the temperature gauges.

Yes the gauges do auto-scale. I've tried to set the default values to sensible limits so they show small amounts of rain, low wind speeds reasonably "visually", but the gauges will re-range once the default maximum (and minimum pressure) values are exceeded.

Great news on the autoscaling. Thanks

How do I fix (or what did I do to break) the "tempunit" issue? Was I supposed to manually edit something in the templates?

mcrossley · **Posted:** Wed Jun 06, 2012 2:34 pm

In your realtimegaugesT.txt file, it should be set to: "tempunit":"<#tempunitnodeg>",

JimDantin · **Posted:** Wed Jun 06, 2012 2:42 pm

mcrossley wrote:

In your realtimegaugesT.txt file, it should be set to: "tempunit":"<#tempunitnodeg>",

It is!
"tempunit":"<#tempunitnodeg>"

I'm running Cumulus 1.9.2 build 1003 -- should I be running something newer?

I'm comfortable just hardcoding "<#tempunitnodeg>" to whatever it should be seeing from Cumulus, if that would help as a temporary hack.

JimDantin · **Posted:** Wed Jun 06, 2012 2:50 pm

FYI, the Cumulus 'realtime.txt' file DOES show 'F':

06/06/12 10:49:31 64.8 50 45.7 1.6 3.1 60 0.00 0.00 29.97 ENE 1 mph F in in 2.4 0.00 0.95 22.87 0.00 73.9 47 64.8 +2.9 64.8 10:42 53.4 05:48 3.5 10:25 6.3 10:18 30.00 09:28 29.91 00:00 1.9.2 1003 4.0 64.8 65.2 0 0 0 62 0.00 3 1 0 ENE 4336 ft 62.9 0.0 767 0

JimDantin · **Posted:** Wed Jun 06, 2012 3:03 pm

I replaced the tag with "F" and it is formatting correctly -- so the issue is that the tag isn't getting processed correctly for some reason.

steve · **Posted:** Wed Jun 06, 2012 3:12 pm

JimDantin wrote:

I'm running Cumulus 1.9.2 build 1003 -- should I be running something newer?

That's a very old, beta build of 1.9.2. It doesn't have the <#tempunitnodeg> web tag.

JimDantin · **Posted:** Wed Jun 06, 2012 3:21 pm

steve wrote:

JimDantin wrote:

I'm running Cumulus 1.9.2 build 1003 -- should I be running something newer?

That's a very old, beta build of 1.9.2. It doesn't have the <#tempunitnodeg> web tag.

That explains it -- I'll upgrade Cumulus.

Thanks so much for the help.
Jim

JimDantin · **Posted:** Wed Jun 06, 2012 4:05 pm

Cumulus upgraded - gauge is now working properly.

Next question -- I would like to change the second gauge to default to Dew Point rather than Apparent -- is that something that I can do?

Thanks

mcrossley · **Posted:** Wed Jun 06, 2012 5:02 pm

Edit the HTML page and delete the word 'checked' from the following line:

Code:

          <input id="rad_dew2" type="radio" name="rad_dew" value="app" checked onclick="doDew(this);">

Then add 'checked' to the following line:

Code:

from
          <input id="rad_dew1" type="radio" name="rad_dew" value="dew" onclick="doDew(this);">
to
          <input id="rad_dew1" type="radio" name="rad_dew" value="dew" checked onclick="doDew(this);">

Edit gauges.js and around line 181 change:

Code:

    g_dew.selected = 'app';
to
    g_dew.selected = 'dew';

and also change:

Code:

    g_dew.title = LANG.apptemp_title;
to
    g_dew.title = LANG.dew_title;

Done.

JimDantin · **Posted:** Sat Jun 09, 2012 2:39 am

Thank you for the help - all is working properly now.

You sure make it easy for inexperienced users like me to deploy a great looking site.

Jim

	It is currently Wed Jun 19, 2013 8:18 am
Please click here before posting. Help me to help you!
Useful Links: Cumulus FAQ • Enhancement requests • Wiki (documentation)
Please put your approximate location into your profile
Add your web site to the Cumulus user map
Vantage Pro2 users with firmware 3.00 should upgrade to fw 3.12 and Cumulus 1.9.4
Latest Cumulus release v1.9.3 (build 1059) - Feb 09 2013 Latest Cumulus beta v1.9.4 build 1080 - Jun 03 2013 --> Latest Cumulus Realtime v1.0.0.5 - Sep 05 2009

Sandaysoft

Temperature problem after upgrade - F vs. C

Who is online