Sandaysoft

First, Thanks for such a great program...
I have been getting an error with the last two versions (1.9.2 and 1.9.3 build 1039)

This is an error I receive when I start the program.

8/1/2012 2:59:52 PM : The station is not initialised
8/1/2012 2:59:52 PM : Byte 0 = 55 Byte 1 = 00
8/1/2012 2:59:52 PM : Try resetting the console

The first indication I get that this is going to happen on restart is the error log telling me my device has stopped sending data and reports errors "Data input appears to have stopped - check your station and connections".

I can still connect with other programs (Easyweather) but not with Cumulus (1.9.3 build 1039)

I am utilizing a Ambient Weather WS-2080 connected via USB.

Sometimes this happens when the station is about 1/4 full on the memory and sometimes it just goes for weeks without issue.
I have tried all the other resets of PC, USB cable, etc and the only way I have found to correct the issue is to pull the batteries of the console and reconfigure the stations settings. Bad part is I lose all the data from the time it stops to the time I reset.

I do not have any issue like this with my OS WMR200A.

Sorry to make my first post in here a cry for help but anything that can be provided is appreciated.

Tinkan
http://www.tinkan.com/WX.html

The memory in your console does not contain the values expected, which mean that it hasn't been initialised correctly (according to the documentation I have). Easyweather appears to ignore this. See the FAQ for how to make Cumulus ignore it.

http://wiki.sandaysoft.com/index.php?title=FAQ#When_I_start_Cumulus.2C_I_get_the_error_message_.22The_station_is_not_initialised.22

_________________
Steve
Sanday Weather
----------------------------------------------------------------------------------------------------------------------------------
Like Cumulus and want to support it? Please donate!