thank you!water01 wrote:Hello CrasHBoneS, I don't know whether or not a PCE-FWS20 is the Italian equivalent of a Fine Offset station your pictures look like it, but Mark advised me to change the Wind Rose Points in Cumulus (Configuration / Display Settings) to 8 rather than 16 to get a better looking Wind Rose result. http://dmjsystems.co.uk/weather/gauges-ss.htm
Yours looks like mine before I changed it so it might also work for you.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Version 2.0 Beta
Moderator: mcrossley
-
- Posts: 96
- Joined: Fri 06 Jan 2012 10:49 am
- Weather Station: PCE-FWS20
- Operating System: Windows XP SP3
- Location: Bellaria Igea Marina (RN)
- Contact:
Re: Version 2.0 Beta
-
- Posts: 96
- Joined: Fri 06 Jan 2012 10:49 am
- Weather Station: PCE-FWS20
- Operating System: Windows XP SP3
- Location: Bellaria Igea Marina (RN)
- Contact:
Re: Version 2.0 Beta
a question for mcrossley
Into the file steelseries.js I read code about Odometer, is there a way to enable odometer on dominant wind rose gauge?
I added in HTML
with no success
Thank You
Into the file steelseries.js I read code about Odometer, is there a way to enable odometer on dominant wind rose gauge?
I added in HTML
Code: Select all
<canvas id="odoGauge" width="90" height="30" style="position:absolute; left:678px; top:180px;"></canvas>
with no success
Thank You
Last edited by CrasHBoneS on Thu 20 Dec 2012 12:32 pm, edited 1 time in total.
- mcrossley
- Posts: 12905
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Version 2.0 Beta
Not in this version, there is no code to drive the windrun odometer. I wanted to get this release out and did not want to go through another test cycle. So a candidate for version 2.1 sometime in the New Year.
-
- Posts: 96
- Joined: Fri 06 Jan 2012 10:49 am
- Weather Station: PCE-FWS20
- Operating System: Windows XP SP3
- Location: Bellaria Igea Marina (RN)
- Contact:
Re: Version 2.0 Beta
I used your odometer code in gauges.js (http://weather.wilmslowastro.com/gauges ... /gauges.js) and upgraded my gauges.jsmcrossley wrote:Not in this version, there is no code to drive the windrun odometer. I wanted to get this release out and did not want to go through another test cycle. So a candidate for version 2.1 sometime in the New Year.
Now I have windrun odometer up and running!
I see lot of code about odometer in steelseries.js that I think it is unused
- meteotortosa
- Posts: 323
- Joined: Thu 04 Dec 2008 12:15 am
- Weather Station: Davis Vantage Pro2 Plus
- Operating System: Windows XP SP3
- Location: Tortosa-Baix Ebre- Catalonia
- Contact:
Re: Version 2.0 Beta
Hi,
I can't see my windrose
http://www.meteotortosa.cat/gauges/gauges-ss.html
These are my files
view-source:http://www.meteotortosa.cat/gauges/gauges-ss.html (copy and paste on your web browser)
http://www.meteotortosa.cat/gauges/scripts/gauges.js
I think is all OK
I can't see my windrose
http://www.meteotortosa.cat/gauges/gauges-ss.html
These are my files
view-source:http://www.meteotortosa.cat/gauges/gauges-ss.html (copy and paste on your web browser)
http://www.meteotortosa.cat/gauges/scripts/gauges.js
I think is all OK
Last edited by meteotortosa on Fri 21 Dec 2012 2:25 pm, edited 2 times in total.
Weather in Tortosa (NE Spain), updated every 15'
- mcrossley
- Posts: 12905
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Version 2.0 Beta
It doesn't look like you are using the realtimegaugesT.txt from the package?
- meteotortosa
- Posts: 323
- Joined: Thu 04 Dec 2008 12:15 am
- Weather Station: Davis Vantage Pro2 Plus
- Operating System: Windows XP SP3
- Location: Tortosa-Baix Ebre- Catalonia
- Contact:
Re: Version 2.0 Beta
Repeat with me..mcrossley wrote:It doesn't look like you are using the realtimegaugesT.txt from the package?
you are asshole, you are asshole, you are asshole, you are asshole, you are asshole,
Now, it's OK, a lot of thanks !!
Weather in Tortosa (NE Spain), updated every 15'
-
- Posts: 512
- Joined: Mon 28 Nov 2011 2:13 am
- Weather Station: Davis VP2/ WLL with DFARS
- Operating System: RPi Raspbian (Buster)
- Location: Ferny Grove, Brisbane, Australia
- Contact:
Re: Version 2.0 Beta
I updated my test page for the gauges and I also removed the test page replacing the old gauges with the new version. The gauges can be be found here: http://localweatherdata.0glo.com/gauges-ss.htm.
Mark thanks for all your work and also for making the radar plot available on the gauges page.
Mark thanks for all your work and also for making the radar plot available on the gauges page.
- gwheelo
- Posts: 453
- Joined: Wed 11 Jun 2008 7:36 pm
- Weather Station: WMR-88
- Operating System: Windows 8.1
- Location: L'Estartit, Spain
- Contact:
Re: Version 2.0 Beta
Thanks Mark - you really delivered a clear, clean and complete package with 2.0. Bravo!Version 2.0 is now available
Here it is on my site: http://www.wheelocknet.net/cumulus/gauges.html?gb
I am sure all the SteelSeries fans agree we owe you a large debt of gratitude for all you have done for us!
George Wheelock
- PaulMy
- Posts: 3876
- Joined: Sun 28 Sep 2008 11:54 pm
- Weather Station: Davis VP2 Plus 24-Hour FARS
- Operating System: Windows8 and Windows10
- Location: Komoka, ON Canada
- Contact:
Re: Version 2.0 Beta
Yes, well done Mark
and much appreciation for your great help,
Paul
and much appreciation for your great help,
Paul
VP2+
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
C1 www.komokaweather.com/komokaweather-ca
MX https://komokaweather.com/cumulusmx/index.htm /index.html /index.php
MX https://komokaweather.com/cumulusmxwll/index.htm /index.html /index.php
MX https:// komokaweather.com/cumulusmx4/index.htm
- meteotortosa
- Posts: 323
- Joined: Thu 04 Dec 2008 12:15 am
- Weather Station: Davis Vantage Pro2 Plus
- Operating System: Windows XP SP3
- Location: Tortosa-Baix Ebre- Catalonia
- Contact:
Re: Version 2.0 Beta
Hi,
this is a screenshot from my Samsug Galaxy S3, It looks a quite wrong
The code is:
this is a screenshot from my Samsug Galaxy S3, It looks a quite wrong
The code is:
Code: Select all
<div class="row">
<div id="tip_6" class="gauge">
<canvas id="canvas_wind" width="251" height="251"></canvas>
</div>
<div id="tip_7" class="gauge">
<canvas id="canvas_dir" width="251" height="251"></canvas>
</div>
<div id="tip_10" class="gauge">
<canvas id="canvas_rose" width="251" height="251"></canvas>
</div>
You do not have the required permissions to view the files attached to this post.
Weather in Tortosa (NE Spain), updated every 15'
- meteotortosa
- Posts: 323
- Joined: Thu 04 Dec 2008 12:15 am
- Weather Station: Davis Vantage Pro2 Plus
- Operating System: Windows XP SP3
- Location: Tortosa-Baix Ebre- Catalonia
- Contact:
Re: Version 2.0 Beta
Chrome on my Android Samsung Galaxy S3mcrossley wrote:Which browser are you using?
You can look here -> http://www.meteotortosa.cat/gauges/gauges-ss.html (it's modified by me)
Weather in Tortosa (NE Spain), updated every 15'
- mcrossley
- Posts: 12905
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Version 2.0 Beta
I see the problem, it is in windrose.js
at line 67 try adding the following...
so the whole if() statement looks like this...
at line 67 try adding the following...
Code: Select all
// resize canvas on main page
document.getElementById('canvas_rose').width = _gaugeSize;
document.getElementById('canvas_rose').height = _gaugeSize;
Code: Select all
// Get the context of the gauge canvas on the HTML page
if ($('#canvas_rose').length) {
_ctxRadarGauge = document.getElementById('canvas_rose').getContext('2d');
// resize canvas on main page
document.getElementById('canvas_rose').width = _gaugeSize;
document.getElementById('canvas_rose').height = _gaugeSize;
}