Hi
I use Cumulus with WeatherDuino Pro2 hw. ( Vantage Pro2 compatible) I want to upload wx data over APRS. I 've done what explained Cumulus help (http://wiki.sandaysoft.com/a/Cumulus.ini) But pressure value is not sent or/displayed on the APRS side. (http://aprs.fi)
Is there any other "hidden" point? Any advice would be appreciated.
Regards.
ta2ei
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
CUMULUS - APRS
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: CUMULUS - APRS
Cumulus definitely sends pressure to CWOP/APRS. Please show a screen shot of your APRS/CWOP settings panel on the Cumulus internet settings screen. If you turn on debug logging, the debug.log file will show the string that Cumulus is sending to CWOP, and any error message being returned by the CWOP servers.
Edit: It occurs to me that you might not be using Cumulus to upload to CWOP, but are instead using the wxnow.txt file and some other application to do the upload (it's hard to say exactly what you're trying to do from the little information you've supplied). If that is the case, please attach a copy of your wxnow.txt file.
Edit: It occurs to me that you might not be using Cumulus to upload to CWOP, but are instead using the wxnow.txt file and some other application to do the upload (it's hard to say exactly what you're trying to do from the little information you've supplied). If that is the case, please attach a copy of your wxnow.txt file.
Steve
-
- Posts: 6
- Joined: Thu 16 Apr 2015 7:38 pm
- Weather Station: WeatherDuino Pro2
- Operating System: Windows 8
- Location: Ankara
Re: CUMULUS - APRS
Thank you for your reply.
I've attached screen shot of Cumulus screen, Cumulus station settings, Cumulus internet settings and aprs page.
And this is wxnow.txt:
Jun 19 2015 18:35
000/000g000t070r000p000P000h68b00000L000
I've attached screen shot of Cumulus screen, Cumulus station settings, Cumulus internet settings and aprs page.
And this is wxnow.txt:
Jun 19 2015 18:35
000/000g000t070r000p000P000h68b00000L000
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: CUMULUS - APRS
Ah, so you are using Cumulus to upload to CWOP. You need to turn on debug logging as previously mentioned.
Are all of your sensors working? Have you really had zero wind all day?
Are all of your sensors working? Have you really had zero wind all day?
Steve
-
- Posts: 6
- Joined: Thu 16 Apr 2015 7:38 pm
- Weather Station: WeatherDuino Pro2
- Operating System: Windows 8
- Location: Ankara
Re: CUMULUS - APRS
I do not use wind and rain sensors. My present sensors are thermometer and humidity for indoor and outdor, pressure sensor, UV sensor.
Anyway turned on debugging. I'll wait for your advices.
Regards.
Edit: The "debug.log" and my Cumulus.ini files attached.
Anyway turned on debugging. I'll wait for your advices.
Regards.
Edit: The "debug.log" and my Cumulus.ini files attached.
You do not have the required permissions to view the files attached to this post.
Last edited by hamix on Fri 19 Jun 2015 6:51 pm, edited 1 time in total.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: CUMULUS - APRS
The details which Cumulus needs to calculate Altimeter Pressure (as required by CWOP) are not being returned in response to the BARDATA command:
0344.704 : 20:12:01.137 Sending BARDATA
0346.735 : 20:12:03.178 Bardata = 0A 0D 4F 4B 0A 0D FFFFFFFF
Here is the example from the Davis protocol spec:
"BARDATA"
It retrieves the current barometer calibration parameters in text. These tell you what the current elevation setting and barometer offset values are, plus some details on the barometer correction factor being used.
Example:
>"BARDATA"<LF>
<<LF><CR>"OK"<LF><CR>
<"BAR 29775"<LF><CR>
<"ELEVATION 27"<LF><CR>
<"DEW POINT 56"<LF><CR>
<"VIRTUAL TEMP 63"<LF><CR>
<"C 29"<LF><CR>
<"R 1001"<LF><CR>
<"BARCAL 0"<LF><CR>
<"GAIN 1533"<LF><CR>
<"OFFSET 18110"<LF><CR>
0344.704 : 20:12:01.137 Sending BARDATA
0346.735 : 20:12:03.178 Bardata = 0A 0D 4F 4B 0A 0D FFFFFFFF
Here is the example from the Davis protocol spec:
"BARDATA"
It retrieves the current barometer calibration parameters in text. These tell you what the current elevation setting and barometer offset values are, plus some details on the barometer correction factor being used.
Example:
>"BARDATA"<LF>
<<LF><CR>"OK"<LF><CR>
<"BAR 29775"<LF><CR>
<"ELEVATION 27"<LF><CR>
<"DEW POINT 56"<LF><CR>
<"VIRTUAL TEMP 63"<LF><CR>
<"C 29"<LF><CR>
<"R 1001"<LF><CR>
<"BARCAL 0"<LF><CR>
<"GAIN 1533"<LF><CR>
<"OFFSET 18110"<LF><CR>
Steve
-
- Posts: 6
- Joined: Thu 16 Apr 2015 7:38 pm
- Weather Station: WeatherDuino Pro2
- Operating System: Windows 8
- Location: Ankara
Re: CUMULUS - APRS
Steve,The details which Cumulus needs to calculate Altimeter Pressure (as required by CWOP) are not being returned in response to the BARDATA command
I'm a lawyer and radio amateur. So I have no idea why " Altimeter Pressure (as required by CWOP) are not being returned"
What can I do?
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: CUMULUS - APRS
I'm the Cumulus author, so I have no idea why they're not being returned either
Perhaps you should ask the Weatherduino author?
Perhaps you should ask the Weatherduino author?
Steve
- Werk_AG
- Posts: 198
- Joined: Sun 13 Jan 2013 8:04 pm
- Weather Station: WeatherDuino 4Pro
- Operating System: Windows 7
- Location: Cercal CDV - Portugal
- Contact:
Re: CUMULUS - APRS
Hi hamixhamix wrote:Steve,The details which Cumulus needs to calculate Altimeter Pressure (as required by CWOP) are not being returned in response to the BARDATA command
I'm a lawyer and radio amateur. So I have no idea why " Altimeter Pressure (as required by CWOP) are not being returned"
What can I do?
Currently WeatherDuino Pro 2 doesn't respond to BARDATA command. Response to this command will be implemented on next build release.
You also have a answer in our support forum.
-
- Posts: 6
- Joined: Thu 16 Apr 2015 7:38 pm
- Weather Station: WeatherDuino Pro2
- Operating System: Windows 8
- Location: Ankara
Re: CUMULUS - APRS
Steve and Werk_AG
Thank you very much for your efforts.
Regards.
Thank you very much for your efforts.
Regards.