Hi All,
I have had CumulusMX v3.3036 running on a Pi Zero for about a month after successfully migrated my v1.9 data.
I have a Fine Offset vendor ID =0x1941 ProductionID 0x8021
The problem I am having is that CumulusMX loses the connection to the station and I lose data and also the
n stops updating the dashboard etc.
I have looked in the MXDiag files and can only see it reports not collecting data but no real error message.
Is there a setting to increase logging?
Any ideas
Ian
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
CumulusMX working on Raspberry Pi Zero but
-
- Posts: 8
- Joined: Thu 02 Jan 2014 7:49 pm
- Weather Station: WH 1081
- Operating System: Raspbian Jessie
- Location: Radcliffe
CumulusMX working on Raspberry Pi Zero but
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: CumulusMX working on Raspberry Pi Zero but
Yes, see https://cumulus.hosiene.co.uk/viewtopic.php?f=27&t=12991madyorky wrote:Is there a setting to increase logging?
Steve
-
- Posts: 8
- Joined: Thu 02 Jan 2014 7:49 pm
- Weather Station: WH 1081
- Operating System: Raspbian Jessie
- Location: Radcliffe
Re: CumulusMX working on Raspberry Pi Zero but
Thanks.. should have read the manualsteve wrote:Yes, see https://cumulus.hosiene.co.uk/viewtopic.php?f=27&t=12991madyorky wrote:Is there a setting to increase logging?
Ian