Hi,
This has come out of the blue, was hoping to gather some good data regarding Storm Deirdre and Cumulus isn't getting any data instead I am getting the red error message is flashing with error '16/12/2018 12:04:57 : The station is not initialised
16/12/2018 12:04:57 : Byte 0 = 12 Byte 1 = 15
16/12/2018 12:04:57 : Try resetting the console
Can anybody help ive reinstalled Cumulus but that didnt work..seems to be a software issue?
Thanks!
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Error 'Station not initialised'
-
- Posts: 3277
- Joined: Sat 13 Aug 2011 9:33 am
- Weather Station: Ecowitt HP2551
- Operating System: Windows 10 64bit
- Location: Burnham-on-Sea
- Contact:
Re: Error 'Station not initialised'
This is dealt with in the FAQ in the Wiki https://cumuluswiki.wxforum.net/a/FAQ#W ... ialised.22
Make sure you totally reset the station by removing the batteries and the USB cord and wait for 20 seconds and then put them back in and restart it.
Make sure you totally reset the station by removing the batteries and the USB cord and wait for 20 seconds and then put them back in and restart it.
-
- Posts: 14
- Joined: Wed 05 Aug 2015 11:18 pm
- Weather Station: Fine Offeset
- Operating System: Windows 10
- Location: Dublin
Re: Error 'Station not initialised'
Thanks very much..worked and fixed.
Much appreciated
Much appreciated
-
- Posts: 10
- Joined: Mon 17 Jan 2022 12:15 pm
- Weather Station: watson w-8681
- Operating System: Windows 7
Re: Error 'Station not initialised'
Hello,
I did the abovementioned solution for about 20 times, but I still get the error:
Do you have any other suggestions that might help me fix this issue?
Kind Regards
KL
I did the abovementioned solution for about 20 times, but I still get the error:
I've changed the usb chord but nothing worked..2/2/2024 10:00:25 μμ : The station is not initialised
2/2/2024 10:00:25 μμ : Byte 0 = 7F Byte 1 = FF
2/2/2024 10:00:25 μμ : Try resetting the console
Do you have any other suggestions that might help me fix this issue?
Kind Regards
KL
-
- Posts: 3277
- Joined: Sat 13 Aug 2011 9:33 am
- Weather Station: Ecowitt HP2551
- Operating System: Windows 10 64bit
- Location: Burnham-on-Sea
- Contact:
Re: Error 'Station not initialised'
If you done this about 20 times it would suggest your Fine Offset has finally bitten the dust and you need a new weather station.Make sure you totally reset the station by removing the batteries and the USB cord and wait for 20 seconds and then put them back in and restart it.
-
- Posts: 10
- Joined: Mon 17 Jan 2022 12:15 pm
- Weather Station: watson w-8681
- Operating System: Windows 7
Re: Error 'Station not initialised'
Really?? I can't believe that it works so well, but it can't connect to my pc..
Thank you for your answer!!
Thank you for your answer!!