Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Ecowitt Advice
- GWCTas
- Posts: 22
- Joined: Sat 22 Mar 2014 1:26 am
- Weather Station: Fine Offset WH2901c
- Operating System: Mac OS X 13.6.3
- Location: Perth, Tasmania, Australia
- Contact:
Re: Ecowitt Advice
Thanks, that worked for all but one. The log file has erroneous data and if I try to input the correct figure in the "Record Value", I get an error.water01 wrote: ↑Sat 16 Dec 2023 7:59 am At the top of the screen on the right is a "Read Logfiles" button. Click on that and load the logfiles (may take a while). When it has finished click on the logfile value that it has read and assuming it is correct allow it to replace the erroneous value by clicking on OK in the dialogue that appears. It automatically replaces the value and updates the alltime.ini values.
The Wiki needs updating!!
You do not have the required permissions to view the files attached to this post.
George
Glenhaven Weather
Glenhaven Weather
- mcrossley
- Posts: 12903
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Ecowitt Advice
Could you screen shot the page where you edit the value before you send it and get the error.
- GWCTas
- Posts: 22
- Joined: Sat 22 Mar 2014 1:26 am
- Weather Station: Fine Offset WH2901c
- Operating System: Mac OS X 13.6.3
- Location: Perth, Tasmania, Australia
- Contact:
Re: Ecowitt Advice
Hi Mark,
Here are the screenshots -
You do not have the required permissions to view the files attached to this post.
George
Glenhaven Weather
Glenhaven Weather
- mcrossley
- Posts: 12903
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Ecowitt Advice
What locale are you using, the date format is unusual in that it has a dot after the month - "Oct. 2021"
- HansR
- Posts: 6026
- Joined: Sat 20 Oct 2012 6:53 am
- Weather Station: GW1100 (WS80/WH40)
- Operating System: Raspberry OS/Bookworm
- Location: Wagenborgen (NL)
- Contact:
Re: Ecowitt Advice
Not totally abnormal (the NL locales have the dot, indicating it is an abbreviation) but unusual in English locales afaik yes.
Hans
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
https://meteo-wagenborgen.nl
CMX build 4017+ ● RPi 3B+ ● Raspbian Linux 6.1.21-v7+ armv7l ● dotnet 8.0.3
- mcrossley
- Posts: 12903
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Ecowitt Advice
Your right, it's unusual for English locales. If like to know which one is being used so I can test against it - though I have found the issue, I'd like to test it against this locale.
- GWCTas
- Posts: 22
- Joined: Sat 22 Mar 2014 1:26 am
- Weather Station: Fine Offset WH2901c
- Operating System: Mac OS X 13.6.3
- Location: Perth, Tasmania, Australia
- Contact:
Re: Ecowitt Advice
I’m in Australia and I just followed the format in the other entries.
You do not have the required permissions to view the files attached to this post.
George
Glenhaven Weather
Glenhaven Weather
- GWCTas
- Posts: 22
- Joined: Sat 22 Mar 2014 1:26 am
- Weather Station: Fine Offset WH2901c
- Operating System: Mac OS X 13.6.3
- Location: Perth, Tasmania, Australia
- Contact:
Re: Ecowitt Advice
Hi again, any thoughts on the error and how to fix it?
No rush as it's a busy time of the year.
Merry Christmas to all!
No rush as it's a busy time of the year.
Merry Christmas to all!
George
Glenhaven Weather
Glenhaven Weather
- mcrossley
- Posts: 12903
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Ecowitt Advice
It's fixed in the next release, but that will now be after Christmas.
- GWCTas
- Posts: 22
- Joined: Sat 22 Mar 2014 1:26 am
- Weather Station: Fine Offset WH2901c
- Operating System: Mac OS X 13.6.3
- Location: Perth, Tasmania, Australia
- Contact:
Re: Ecowitt Advice
Thanks Mark!
Your work is greatly appreciated.
Cheers,
George
Your work is greatly appreciated.
Cheers,
George
George
Glenhaven Weather
Glenhaven Weather
- GWCTas
- Posts: 22
- Joined: Sat 22 Mar 2014 1:26 am
- Weather Station: Fine Offset WH2901c
- Operating System: Mac OS X 13.6.3
- Location: Perth, Tasmania, Australia
- Contact:
Re: Ecowitt Advice
I still seem to have some rainfall "gremlins" in the works. I can make the adjustments to the records but it is not changing in some of the screens.
I manually edit the entry in Record Value & Record Timestamp, but when I return the entry has returned to the original value? Am I making the adjustments in the right place and is it correct to manually edit?
Also, I notice there are errors in the Today/Yesterday screen but I am not sure where, how or if I can alter these?
I manually edit the entry in Record Value & Record Timestamp, but when I return the entry has returned to the original value? Am I making the adjustments in the right place and is it correct to manually edit?
Also, I notice there are errors in the Today/Yesterday screen but I am not sure where, how or if I can alter these?
You do not have the required permissions to view the files attached to this post.
George
Glenhaven Weather
Glenhaven Weather
- mcrossley
- Posts: 12903
- Joined: Thu 07 Jan 2010 9:44 pm
- Weather Station: Davis VP2/WLL
- Operating System: Bullseye Lite rPi
- Location: Wilmslow, Cheshire, UK
- Contact:
Re: Ecowitt Advice
You cannot edit the today/yesterday "records"?GWCTas wrote: ↑Sun 14 Jan 2024 4:58 am I still seem to have some rainfall "gremlins" in the works. I can make the adjustments to the records but it is not changing in some of the screens.
I manually edit the entry in Record Value & Record Timestamp, but when I return the entry has returned to the original value? Am I making the adjustments in the right place and is it correct to manually edit?
Also, I notice there are errors in the Today/Yesterday screen but I am not sure where, how or if I can alter these?
Screenshot.jpg
You can edit "Todays rainfall" on the day the error occurs, that will get the total correct but not alter any records, they have to edited separately.
After using edit "Todays rainfall", do not be tempted to try and adjust files yourself, it will mess things up. You must wait until you have had a day rollover, then do a second data clean-up.
- GWCTas
- Posts: 22
- Joined: Sat 22 Mar 2014 1:26 am
- Weather Station: Fine Offset WH2901c
- Operating System: Mac OS X 13.6.3
- Location: Perth, Tasmania, Australia
- Contact:
Re: Ecowitt Advice
Thanks Mark.
I understand the today/yesterday advice. Is there a Wiki "how to" guide that is available so as to not keep pestering the forum users?
Thanks,
George
I understand the today/yesterday advice. Is there a Wiki "how to" guide that is available so as to not keep pestering the forum users?
Thanks,
George
George
Glenhaven Weather
Glenhaven Weather