Just installed v 3283a (twice) and both times the current temp won't record since the high temp starts off as 999.0 and low temp is -999.0. The outdoor spike removal will not go higher than 999. Any tips on getting past this?
2024-03-28 18:07:54 - Spike removal: NewVal=70.4 OldVal=999.0 SpikeTempDiff=999.0 HighLimit=60.0 LowLimit=-60.0
2024-03-28 18:07:54 - Spike removal: Temp difference greater than specified; reading ignored
EDIT: Looks like setting the High and Low limit to 140F and -40F resolved the issue.
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.0 (build 4022) - 11 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Spike Removal v3283
Moderator: mcrossley