Hi,
I just upgraded Mono to v6.12 before upgrading CMX from 3.2.41 to 3.25.0 and it is all working well except I noticed my extra sensors are no longer being detected. According to CMX, "No sensors enabled"; however, I have not changed the Settings > Station Settings > Common Options > Log Extra Sensors, which is still enabled. When I check Settings > Extra Sensors the options appear to have changed quite a bit since I last checked, so I presume sensing of my weather station's extra sensors may have changed in a previous but recent version of CMX. My weather station is an Oregon Scientific WMR-928 with three THGN132N extra sensors and CMX running on on Ubuntu 18.04.6 LTS.
Could I get some advice and help with this please?
Thanks!
Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Extra Sensors no longer "enabled"
Moderator: mcrossley
-
SunDial
- Posts: 53
- Joined: Tue 03 Jan 2017 8:12 pm
- Weather Station: OS WMR928N
- Operating System: OPi Armbian 5.75 Ubuntu Bionic
Re: Extra Sensors no longer "enabled"
Thanks, that worked.