Welcome to the Cumulus Support forum.
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
Latest Cumulus MX V4 release 4.0.1 (build 4023) - 16 May 2024
Latest Cumulus MX V3 release 3.28.6 (build 3283) - 21 March 2024
Legacy Cumulus 1 release 1.9.4 (build 1099) - 28 November 2014
(a patch is available for 1.9.4 build 1099 that extends the date range of drop-down menus to 2030)
Download the Software (Cumulus MX / Cumulus 1 and other related items) from the Wiki
My dials on the Cumulus program are not updating
My dials on the Cumulus program are not updating
I have a WS2308 weather station, The dials in the cumulus prog. are not updating but everything else is any ideas?
- Budgie
- Posts: 28
- Joined: Sat 13 Dec 2008 11:01 pm
- Weather Station: LaCrosse WS2300 & Davis VP2
- Location: Isle of Lewis
- Contact:
Re: My dials on the Cumulus program are not updating
Which dials aren't updating, the wind speed & direction ones on the right hand side of the main screen or the ones on a website?
If it's on your website then make sure that you have it set to upload the realtime data file:
On the main screen click "Configuration" > "Internet" and in the Web Settings area make sure that the box marked "Enable Realtime" is ticked.
If it's on your website then make sure that you have it set to upload the realtime data file:
On the main screen click "Configuration" > "Internet" and in the Web Settings area make sure that the box marked "Enable Realtime" is ticked.
Re: My dials on the Cumulus program are not updating
Hi and thanks for replying,
Yes the ones on the main screen I'm sorry i am kinda a newbie at this, I noticed when I stop cumulus and then start it it updates but only when I do this, I checked all the settings that I could find. It's running on windows 2003
Yes the ones on the main screen I'm sorry i am kinda a newbie at this, I noticed when I stop cumulus and then start it it updates but only when I do this, I checked all the settings that I could find. It's running on windows 2003
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: My dials on the Cumulus program are not updating
So the wind data is updating OK in figures on the left hand side of the window, but none of the three dials on the right hand side are doing anything at all?
Steve
Steve
Re: My dials on the Cumulus program are not updating
Hi steve
Its only updating when I close the program and open back up, The temps, barom, and humidity work
Its only updating when I close the program and open back up, The temps, barom, and humidity work
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: My dials on the Cumulus program are not updating
It's still not clear to me what isn't updating. The wind speed isn't updating at all (apart from when you stop and start it) - including the figures at the left hand side?
Could you please turn on the debug log and send me the debug.log after a few minutes running?
Thanks,
Steve
Could you please turn on the debug log and send me the debug.log after a few minutes running?
Thanks,
Steve
Re: My dials on the Cumulus program are not updating
Sorry
Here's the log
Here's the log
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: My dials on the Cumulus program are not updating
Ah - you're not using one of the latest (beta) builds, are you?
I'm afraid I only added the logging for the WS2300 in the recent builds of 1.8.4 - would you mind installing the latest build and trying again with that?
http://www.nybbles.co.uk/downloads/beta ... sSetup.exe
Thanks,
Steve
I'm afraid I only added the logging for the WS2300 in the recent builds of 1.8.4 - would you mind installing the latest build and trying again with that?
http://www.nybbles.co.uk/downloads/beta ... sSetup.exe
Thanks,
Steve
Re: My dials on the Cumulus program are not updating
No luck,
I updated over the old version
I updated over the old version
You do not have the required permissions to view the files attached to this post.
Re: My dials on the Cumulus program are not updating
These dials do not change unless I reboot cumulus
You do not have the required permissions to view the files attached to this post.
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: My dials on the Cumulus program are not updating
The first byte of the wind data that your station is returning has the value 0x08, so Cumulus discards it (the Open2300 code that I used as a guide for how to read the data does this - it discards anything non-zero in this byte). I've found a brief discussion on the Open2300 mailing list archive from a while ago where someone else was getting 0x08, and took out this check as the rest of the data was apparently valid... so I guess I could do the same.
Steve
Steve
Re: My dials on the Cumulus program are not updating
Steve,
So I should wait for your correction. also is this why the realtime is not working on the website part of this.?
Thanks
So I should wait for your correction. also is this why the realtime is not working on the website part of this.?
Thanks
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: My dials on the Cumulus program are not updating
Yes, I'll have something tomorrow.wmckin7 wrote:Steve,
So I should wait for your correction.
Yes - the realtime wind gauges won't move because the wind speed readings are all being discarded.also is this why the realtime is not working on the website part of this.?
Steve
- steve
- Cumulus Author
- Posts: 26701
- Joined: Mon 02 Jun 2008 6:49 pm
- Weather Station: None
- Operating System: None
- Location: Vienne, France
- Contact:
Re: My dials on the Cumulus program are not updating
The latest build should get your wind data updating:
http://www.nybbles.co.uk/downloads/beta ... sSetup.exe
Steve
http://www.nybbles.co.uk/downloads/beta ... sSetup.exe
Steve
Re: My dials on the Cumulus program are not updating
Steve,
Thanks for the fix, Today there is no wind but the wind direction was also not working as well did this also fix this issue?
Thanks
Thanks for the fix, Today there is no wind but the wind direction was also not working as well did this also fix this issue?
Thanks